Manualshelf

5400R zl2 Switch Series

ManualsBrandsARUBA ManualsHardwareHPE 5412R 92GT PoE+ / 4SFP+ (No PSU) v3 zl2 switch - 92 ports - Managed - rack-mountable
21222324252627282930
Table Of Contents
QuickSpecs
Aruba 5400R zl2 Switch Series
Configuration
Page
21
NOTE 4
This power supply is ONLY supported on the J9821A, JL002A, JL095A, JL003A,
J9822A, JL001A and J9826A switches.
NOTE 6
If #B2E is selected Then replace Localized option with #B2E for power supply
and with #B2E for switch. (Offered only in NA, Mexico, Taiwan, and Japan)
NOTE 7
Power Supplies can be mixed for a switch enclosure
Remarks:
For J9828A, J9829A, J9830A/B: Power Supplies can be mixed for a switch
enclosure. However, the three different power supplies each require different
power cords, and the wall plug that is needed for J9830A is different from the
wall plug that is n
eeded for J9828A and J9829A. Moreover, full redundancy and
N+1 redundancy are only supported with like power supplies.
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord
- #B2B in North America,
Mexico, Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack
Level CTO)
Switch/Router/Power Supply to Wall Power Cord
- Localized Option (Watson
Default for BTO and Box Level CTO)
High Volt Switch/Router/Power Supply to Wall
Power Cord - #B2E Option.
(Offered only in North America, Mexico, Taiwan, and Japan)
No Localized Power Cord Selected - #AC3 Option
JL448A
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A