5400R zl2 Switch Series

QuickSpecs
Aruba 5400R zl2 Switch Series
Technical Specifications
Page
32
Management Module
Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB
DDR3 SODIMM
Mounting and enclosure
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); Horizontal
surface mounting only
Performance
IPv6 Ready Certified
1000 Mb Latency
< 2.8
µ
s (FIFO 64-byte packets)
10 Gbps Latency
< 1.8 µs (FIFO 64-byte packets)
40 Gbps Latency
< 1.5
µ
s (FIFO 64-byte packets)
Throughput
up to 1142.8 Mpps
Routing/Switching
capacity
1920 Gbps
Switch fabric speed
2030 Gbps
Routing table size
10000 entries (IPv4), 5000 entries (IPv6)
MAC address table size
64000 entries
Environment
Operating temperature
32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C transceiver installed,
0°C to 35°C with FIPS Opacity Shield installed
Operating relative
humidity
15% to 95% @ 113°F (45°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 95% @ 149°F (65°C), noncondensing
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 49 dB, Pressure: 35.7 dB ISO 7779, ISO 9296
Electrical characteristics
Frequency
50/60 Hz
80plus.org Certification
Gold
Description
Does not come with power supply. Four power supply slots are available;
three different power supplies are available. See power supply products for
additional specifications.
Maximum heat
dissipation
4900 BTU/hr (5169 kJ/hr), (max. non-PoE); 7400 BTU/hr (7,807 kJ/hr)
(max. using PoE)
Voltage
110 - 127 / 200 - 240 VAC, rated
Idle power
312 W
NOTES
Idle power is the actual power consumption of the device with no ports
connected. Heat dissipation does not include heat dissipated by the PoE-
powered devices themselves. When more than four power cords are
installed in a 5412R zl2 switch chassis, additional installation
requirements are needed. Refer to the HPE 5400R zl2 Switches Quick
Setup Guide and Safety/Regulatory Information manual for details.
Safety
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
Emissions
FCC part 15 Class A; EN 55022/CISPR 22 Class A
Immunity
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2; 4 kV CD, 8 kV AD; HPE ENV. 765.002
Radiated
IEC 61000-4-3; 3 V/m
EFT/Burst
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
Surge
IEC 61000-4-5; 1 kV/2 kV AC, 1kV signal, 0.5 kV DC
Conducted
IEC 61000-4-6; 3 Vrms