2930M Switch Series Data Sheet

DATA SHEET
ARUBA 2930M SWITCH SERIES
SPECIFICATIONS
JL322A Aruba 2930M 48G PoE+ 1-slot
Switch
JL323A Aruba 2930M 40G 8 HPE
Smart Rate PoE+ 1-slot Switch
JL324A Aruba 2930M 24 HPE
Smart Rate PoE+ 1-slot Switch
Electrical Characteristics
Frequency 50/60Hz 50/60Hz 50/60Hz
Maximum Heat
Dissipation
200 BTU/hr
216 kJ/hr
145 BTU/hr
150 kJ/hr
150 BTU/hr
162 kJ/hr
Voltage JL086A PSU:
100-127/200-240 VAC
JL087A PSU:
110-127/200-240 VAC
JL086A PSU:
100-127/200-240 VAC
JL087A PSU:
110-127/200-240 VAC
JL086A PSU:
100-127/200-240 VAC
JL087A PSU:
110-127/200-240 VAC
Current JL086A PSU (each): 5A/2.5A
JL087A PSU (each): 8.5A/5A
JL086A PSU (each): 5.7/3A
JL087A PSU (each): 10A/5.1A
JL086A PSU (each): 5.9A/3A
JL087A PSU (each): 10A/5.1A
Maximum Power
Rating
JL086A PSU (each): 470W
JL087A PSU (each): 860W
JL086A PSU (each): 538W
JL087A PSU (each): 941W
JL086A PSU (each): 554W
JL087A PSU (each): 957W
Idle Power 40W 75W 95W
PoE Power
(Max Possible)
1440 Watts 1440 Watts 860 Watts
Hibernate Power 7W 7W 7W
Notes Idle power is the actual power
consumption of the device with no
ports connected. Maximum power
rating and maximum heat dissipation
are the worst case theoretical
maximum numbers provide for
planning the infrastructure with
fully loaded PoE (if equipped), 100%
trac, all ports plugged in, and all
modules populated.
Idle power is the actual power
consumption of the device with no
ports connected. Maximum power
rating and maximum heat dissipation
are the worst case theoretical
maximum numbers provide for
planning the infrastructure with
fully loaded PoE (if equipped), 100%
trac, all ports plugged in, and all
modules populated.
Idle power is the actual power
consumption of the device with no
ports connected. Maximum power
rating and maximum heat dissipation
are the worst case theoretical
maximum numbers provide for
planning the infrastructure with
fully loaded PoE (if equipped), 100%
trac, all ports plugged in, and all
modules populated.
• JL308A Aruba 40G QSFP+ LC BiDi 150m MMF XCVR
• JH231A HP X142 40G QSFP+ MPO SR4 Transceiver
• JH232A HP X142 40G QSFP+ LC LR4 SM Transceiver
• JH233A HP X142 40G QSFP+ MPO CSR4 Transceiver
The operating temperature range for an Aruba 2930M switch is 0°C to 50°C (32°F to 122°F) if any of the following
transceivers are installed in the switch:
• J9150A HP X132 10G SFP+ LC SR Transceiver
• J9151A HP X132 10G SFP+ LC LR Transceiver
• J9152A HP X132 10G SFP+ LC LRM Transceiver
• J9153A HP X132 10G SFP+ LC ER Transceiver