QuickSpecs Aruba 2930M Switch Series Overview Aruba 2930M Switch Series Product overview The Aruba 2930M Switch Series is designed for customers creating digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager and Aruba AirWave.
QuickSpecs Aruba 2930M Switch Series Overview • • Ready for the software defined network with REST APIs and OpenFlow support Simple deployment with Zero Touch Provisioning Features and Benefits Software-defined networks • Multiple programmatic interfaces supported Supports REST APIs, Openflow 1.0 and 1.3, and more, to enable automation of network operations, monitoring, and troubleshooting.
QuickSpecs Aruba 2930M Switch Series Overview - IPv6 host enables switches to be managed in an IPv6 network Dual stack (IPv4 and IPv6) transitions from IPv4 to IPv6, supporting connectivity for both protocols MLD snooping forwards IPv6 multicast traffic to the appropriate interface IPv6 ACL/QoS supports ACL and QoS for IPv6 network traffic IPv6 routing supports static and RIPng protocols Security provides RA guard, DHCPv6 protection, dynamic IPv6 lockdown, and ND snooping Performance • • • • Energy-eff
QuickSpecs Aruba 2930M Switch Series Overview Management • • • • • • Aruba Central cloud- based management platform offers simple, secure and cost effective way to manage switches Zero-Touch-Provisioning (ZTP) simplifies installation of the switch infrastructure using Aruba Activate-based or DHCPbased process with AirWave Network Management Flexible management with same hardware - Supports both cloud-based Central and on-premise AirWave with the same hardware ensuring change management platform without r
QuickSpecs Aruba 2930M Switch Series Overview • Policy-based routing uses a classifier to select traffic that can be forwarded based on policy set by the network administrator (limited to 16 next-hop routes) Security • • • • • • • • • • • • • • • • • • • • • • Multiple user authentication methods - IEEE 802.1X uses an IEEE 802.
QuickSpecs Aruba 2930M Switch Series Overview • • • Per-port broadcast throttling configures broadcast control selectively on heavy traffic port uplinks Private VLAN provides network security by restricting peer-to-peer communication to prevent a variety of malicious attacks; typically a switch port can only communicate with other ports in the same community and/or an uplink port, regardless of VLAN ID or destination MAC address IEEE 802.
QuickSpecs Aruba 2930M Switch Series Configuration Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution. Aruba 2930M 40G 8 HPE Smart Rate PoE+ 1-slot Switch • 8 Smart Rate Ports 1/2.5/5/10GbaseT PoE+ • 36 10/100/1000BaseT Ports PoE+ • 4 Combo Ports 10/100/1000BaseT PoE+ or 100M/1G SFP Ports • min=0 \\ max=4 SFP Transceivers • 1 Uplink Module Slot • 1 Stacking Module Slot • Must select minimum 1 Power Supply (Default Qt
QuickSpecs Aruba 2930M Switch Series Configuration • • • • • • • 4 Combo Ports 10/100/1000BaseT PoE+ or 100M/1G SFP Ports 44 10/100/1000BaseT PoE+ min=0 \\ max=4 SFP Transceivers 1 Uplink Module Slot 1 Stacking Module Slot Must select minimum 1 Power Supply (Default Qty1 JL086A) 1U - Height See Configuration NOTE: 1 Configuration Rules: NOTE 1 The following Transceivers install into this Module: (Use #0D1 or #B01 if switch is CTO) - if applicable HPE X121 1G SFP LC LH Transceiver J4860C HPE X121 1G SF
QuickSpecs Aruba 2930M Switch Series Configuration • • • • • • • 4 Combo Ports 10/100/1000BaseT PoE+ or 100M/1G SFP Ports 20 10/100/1000BaseT PoE+ min=0 \\ max=4 SFP Transceivers 1 Uplink Module Slot 1 Stacking Module Slot Must select minimum 1 Power Supply 1U - Height See Configuration NOTE: 1, 2, 3 Aruba 2930M 48G 1-slot Switch • 4 Combo Ports 10/100/1000BaseT or 100M/1G SFP Ports • 44 10/100/1000BaseT • min=0 \\ max=4 SFP Transceivers • 1 Uplink Module Slot • 1 Stacking Module Slot • Must select min
QuickSpecs Aruba 2930M Switch Series Configuration Aruba 3810M/2930M 1-port QSFP+ 40GbE Module • 1 x QSFP+ Ports Aruba 3810M 4 HPE Smart Rate PoE+ Module • 4 x HPE Smart Rate Ports Aruba 3810M/2930M 4-port 100M/1G/10G SFP+ MACsec Module • 4 x 10GbE SFP+ Ports JL078A See Configuration NOTE: 3 JL081A JL083A See Configuration NOTE: 1, 2 Configuration Rules: NOTE 1 The following 1G Transceivers install into this Module (Use #0D1 or #B01 quoted to switch if switch is CTO) if applicable HPE X121 1G SFP LC L
QuickSpecs Aruba 2930M Switch Series Configuration HPE X242 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable HPE X242 40G QSFP+ to QSFP+ 5m Direct Attach Copper Cable Remarks: JH235A JH236A Watson Only Blue Note - Although all 3810M/2930M Switches are compatible with the 4 Port HPE Smart Rate module, non PoE switches do not provide PoE power to the HPE Smart Rate Module.
QuickSpecs Aruba 2930M Switch Series Configuration Aruba 40G QSFP+ LC Bidirectional 150m MMF 2-strand Transceiver HPE X142 40G QSFP+ MPO SR4 Transceiver HPE X142 40G QSFP+ LC LR4 SM Transceiver HPE X142 40G QSFP+ MPO eSR4 300M Transceiver Aruba 40G QSFP+ LC Bidirectional 150m MMF 2-strand Transceiver HPE X242 40G QSFP+ to QSFP+ 1m Direct Attach Copper Cable HPE X242 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable HPE X242 40G QSFP+ to QSFP+ 5m Direct Attach Copper Cable JL308A JH231A JH232A JH233A JL308
QuickSpecs Aruba 2930M Switch Series Configuration • C15 PDU Jumper Cord (NA/MEX/TW/JP) PDU Cable ROW • C15 PDU Jumper Cord (ROW) JL087A#B2C High Volt Power Supply to Wall Power Cord • NEMA L6-20P Cord (NA/MEX/JP/TW) JL087A#B2E No Power Cord • No Localized Power Cord Selected JL087A#AC3 Configuration Rules: NOTE 1 This PSU is compatible with the following Switches: JL319A; JL321A NOTE 2 This PSU is compatible with the following Switches: JL320A; JL322A; JL323A; JL324A NOTE 3 Localization requ
QuickSpecs Aruba 2930M Switch Series Configuration HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable QK736A QK737A Switch Enclosure Options Mounting Kit HPE X410 1U Universal 4-post Rackmount Kit J9583A See Configuration NOTE: 1 Configuration Rules: NOTE 1 If this Mounting Kit is ordered with #0D1, then it integrates to the HP Universal Rack.
QuickSpecs Aruba 2930M Switch Series Technical Specifications Aruba 2930M 24G 1-slot Switch (JL319A) 20 Autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, I/O ports and slots IEEE 802.
QuickSpecs Aruba 2930M Switch Series Technical Specifications Current Maximum power rating Idle Power PoE Power (Max Possible) Hibernate Power Notes JL085A PSU: 1A/0.5A 93W 28W N/A 7W Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst case theoretical maximum numbers provide for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
QuickSpecs Aruba 2930M Switch Series Technical Specifications Nonoperating/Storage temperature Nonoperating/Storage relative humidity Acoustic Primary Airflow direction Electrical Characteristics Frequency Maximum Heat Dissipation Voltage Current Maximum power rating Idle Power PoE Power (Max Possible) Hibernate Power Notes -40°C to 70°C up to 15000 ft 90% at 65°C (non-condens- ing); 15,000 ft Sound Power LWaD=4.1 Bel, Sound Pressure LpAm, Bystander = 23.
QuickSpecs Aruba 2930M Switch Series Technical Specifications Environment 10Gbps Latency Throughput Stacking Performance Switching Capacity Switching Capacity (including Stacking) Routing table Size Mac Address Table Size Operating temperature Operating relative humidity Nonoperating/Storage temperature Nonoperating/Storage relative humidity Acoustic Primary Airflow direction Electrical Characteristics Frequency Maximum Heat Dissipation Voltage Current Maximum power rating Idle Power PoE Power (Max Pos
QuickSpecs Aruba 2930M Switch Series Technical Specifications Physical characteristics Dimensions 1.73" (Height) x 17.42" (Width) x 12.77" (Depth) (4.39cm x 44.25cm x 32.43cm) 10.25 lbs 4.65 kg Weight Memory and processor Dual Core ARM Cortex A9 @ 1016 MHz 1 GB DDR3 SDRAM Packet Buffer Size: 12.38 MB 4.5MB Ingress/7.875MB Egress 4GB eMMC Performance IPv6 Ready certified < 98.5us (FIFO 64 byte packets) 10 Mbps Latency <11.8us (FIFO 64-byte Packets) 100 Mbps Latency < 3.
QuickSpecs Aruba 2930M Switch Series Technical Specifications infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. Aruba 2930M 40G 8 HPE Smart Rate PoE+ 1-slot Switch (JL323A) 36 Autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, I/O ports and slots IEEE 802.3ab Type 1000Base-T PoE+); Duplex: 10BASE-T/100BASE-TX:half or full;1000BASE-T:full only 4 Combo 10/100/1000BASE-T PoE+ or 100/1000Mbps SFP 8 802.3bz 1/2.
QuickSpecs Aruba 2930M Switch Series Technical Specifications Acoustic Primary Airflow direction Electrical Characteristics Frequency Maximum Heat Dissipation Voltage Current Maximum power rating Idle Power PoE Power (Max Possible) Hibernate Power Notes Sound Power LWaD=4.4 Bel, Sound Pressure LpAm, Bystander = 26.0 dB Port to Power 50/60Hz 145 BTU/hr 150 kJ/hr JL086A PSU: 100-127/200-240 VAC JL087A PSU: 110-127/200-240 VAC JL086A PSU (each): 5.7/3A JL087A PSU (each): 10A/5.
QuickSpecs Aruba 2930M Switch Series Technical Specifications Environment 10 Gbps Latency Throughput Stacking Performance Switching Capacity Switching Capacity (including Stacking) Routing table Size Mac Address Table Size Operating temperature Operating relative humidity Nonoperating/Storage temperature Nonoperating/Storage relative humidity Acoustic Primary Airflow direction Electrical Characteristics Frequency Maximum Heat Dissipation Voltage Current Maximum power rating Idle Power PoE Power (Max P
QuickSpecs Aruba 2930M Switch Series Technical Specifications Aruba 40G QSFP+ LC Bidirectional 150m MMF 2-strand Transceiver HPE X142 40G QSFP+ MPO SR4 Transceiver HPE X142 40G QSFP+ LC LR4 SM Transceiver HPE X142 40G QSFP+ MPO eSR4 300M Transceiver JL308A JH231A JH232A JH233A General Specifications Safety UL 60950-1, 2nd Edition EN 60950-1:2006 +A11:2009 : A1:2010 +A12:2011 +A2:2013 IEC60950-1:2005 +A1:2009 +A2:2013 CSA 22.2 No.
QuickSpecs Aruba 2930M Switch Series Technical Specifications Denial of service protection • CPU DoS Protection Device Management • RFC 1155 Structure and Mgmt Information (SMIv1) • RFC 1157 SNMPv1/v2c • RFC 1591 DNS (client) • RFC 1901 (Community based SNMPv2) • RFC 1901-1907 SNMPv2c, SMIv2 and Revised MIB-II • RFC 1908 (SNMP v1/2 Coexistence) • RFC 2576 (Coexistence between SNMP V1, V2, V3) • RFC 2578-2580 SMIv2 • RFC 2579 (SMIv2 Text Conventions) • RFC 2580 (SMIv2 Conformance) • RFC 2819 (RMON group
QuickSpecs Aruba 2930M Switch Series Technical Specifications • RFC 1918 Address Allocation for Private Internet • RFC 2030 Simple Network Time Protocol (SNTP) v4 • RFC 2131 DHCP • RFC 2236 IGMP Snooping • RFC 2453 RIPv2 • RFC 2865 Remote Authentication Dial In User Service (RADIUS) • RFC 2866 RADIUS Accounting • RFC 3046 DHCP Relay Agent Information Option • RFC 3411 An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks • RFC 3412 Message Processing and Dispatchin
QuickSpecs Aruba 2930M Switch Series Technical Specifications • RFC 3596 DNS Extension for IPv6 • RFC 3810 MLDv2 for IPv6 • RFC 4022 MIB for TCP • RFC 4113 MIB for UDP • RFC 4251 SSHv6 Architecture • RFC 4252 SSHv6 Authentication • RFC 4253 SSHv6 Transport Layer • RFC 4254 SSHv6 Connection • RFC 4291 IP Version 6 Addressing Architecture • RFC 4293 MIB for IP • RFC 4419 Key Exchange for SSH • RFC 4443 ICMPv6 • RFC 4541 IGMP & MLD Snooping Switch • RFC 4861 IPv6 Neighbor Discovery • RFC 4862 IPv6 Stateless
QuickSpecs Aruba 2930M Switch Series Technical Specifications • RFC 2579 Textual Conventions for SMIv2 • RFC 2580 Conformance Statements for SMIv2 • RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events) • RFC 2819 Remote Network Monitoring Management Information Base • RFC 2856 Textual Conventions for Additional High Capacity Data Types • RFC 2925 Definitions of Managed Objects for Remote Ping, Traceroute, and Lookup Operations • RFC 3164 BSD syslog Protocol • RFC 3176 sFlow
QuickSpecs Aruba 2930M Switch Series Technical Specifications • RFC 3579 RADIUS Support For Extensible Authentication Protocol (EAP) • RFC 3580 IEEE 802.1X RADIUS • RFC 3580 IEEE 802.1X Remote Authentication Dial In User Service (RADIUS) Usage Guidelines • RFC 4576 RADIUS Attributes • Access Control Lists (ACLs) • draft-grant-tacacs-02 (TACACS) • Guest VLAN for 802.
QuickSpecs Aruba 2930M Switch Series Accessories Aruba 2930M Switch Series accessories Modules Aruba 2930 2-port Stacking Module Aruba 3810M/2930M 1-port QSFP+ 40GbE Module Aruba 3810M/2930M 4-port 100M/1G/10G SFP+ MACsec Module Aruba 3810M 4 HPE Smart Rate PoE+ Module JL325A JL078A JL083A JL081A Transceivers Aruba 100M SFP LC FX 2km MMF Transceiver Aruba 1G SFP RJ45 T 100m Cat5e Transceiver Aruba 1G SFP LC SX 500m OM2 MMF Transceiver Aruba 1G SFP LC LX 10km SMF Transceiver Aruba 1G SFP LC LH 70km SMF T
QuickSpecs Aruba 2930M Switch Series Acessories HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable QK736A QK737A Page 30
QuickSpecs Aruba 2930M Switch Series Summary of Changes Date 02-Jul-2018 05-Feb-2018 08-Jan-2018 11-Sep-2017 04-Sep-2017 Version History Version 8 Version 7 Version 6 Version 5 Version 4 Action Changed Changed Changed Changed Added 07-Aug-2017 03-Jul-2017 01-May-2017 Version 3 Version 2 Version 1 Added Added Created Description of Change Software feature update Configuration section updated Software feature update Family product image updated Model added: JL323A, JL324A SKUs added: JL308A SKU added: