Instant On AP22 Data Sheet

DATA SHEET INDOOR ACCESS POINT AP22
NEXT-GENERATION 802.11AX WI-FI FEATURES
ORTHOGONAL FREQUENCY-DIVISION MULTIPLE
ACCESS (OFDMA)
Allows access points (APs) to handle multiple Wi-Fi
6-capable clients on each channel simultaneously—
regardless of device or trac type. This improves
eciency by boosting overall capacity, while reducing
latency.
TARGET WAKE TIME (TWT)
Ideal for IoTs that communicate infrequently, TWT
establishes a schedule for when clients need to
communicate with an AP. This helps reduce power
consumption, extending the battery life of clients.
MULTIUSER, MULTIPLE INPUT, MULTIPLE
OUTPUT (MU-MIMO)
Allows you to serve multiple clients (Wi-Fi 5 and
Wi-Fi 6) at the same time.
1024-QUADRATURE AMPLITUDE MODULATION
(1024-QAM)
Enables a 25% data increase over 256 QAM,
improving throughput in your access points and
devices.
TRUSTED PLATFORM MODULE (TPM)
All Aruba Instant On access points have an installed
TPM for secure storage of credentials, keys, and boot
codes.
BASIC SERVICE SET COLORING (BSS COLORING)
Allows the network to assign a “color” tag to a channel
and reduce the threshold for interference. Network
performance is improved because APs on the same
channel can be closer together and still transmit at
the same time—as long as they are dierent colors.
ARUBA ADVANCED CELLULAR COEXISTENCE
(ACC)
Uses built-in ltering to automatically minimize
the impact of interference from cellular networks,
distributed antenna systems (DAS), and commercial
small-cell or femtocell equipment.
LOW DENSITY PARITY CHECK (LDPC)
Delivers high-eciency error correction for increased
throughput.
TRANSMIT BEAMFORMING (TXBF)
Delivers increased signal reliability and range.