OWNER’S MANUAL AND INSTALLATION GUIDE MS1400GFM Visit us at www.asaelectronics.com to see our full line of mobile audio and video products.
INSTALLATION Preparation Please read entire manual before installation. Before You Start 1.Disconnect negative battery terminal. (consult a qualified technician for instructions) 2.Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started 1.Remove 2 transit screws located on top of the unit. 2.
WIRING DIAGRAM CONTROL LOCATIONS ❶ Tune/Track Down ❷ Power ❸ Volume Up ❹ Mode ❺ LCD Display ❻ EQ ❼ Auto Store/Preset Scan ❽ Eject ❾ Mute ❿ Audio Selector Volume Down Tune/Track Up Band/Loudness Preset 1/CD Pause Preset 2/CD Scan Preset 3/CD Repeat Preset 4/CD Shuffle Preset 5 Preset 6 Reset The MS1400GFM is designed to not require a constant voltage supply to maintain station memories or operational settings. Do not connect to a voltage source which is constantly hot to prevent draining the battery.
BASIC OPERATION Power (PWR) ❷ Press PWR or any other button (except EJECT) to turn the unit on. Inserting a CD will turn the unit on automatically. Press PWR to turn the unit off. LCD Panel ❺ The Liquid Crystal Display (LCD) panel displays the frequency and all activated functions. Note: LCD panels may take longer to illuminate when subjected to cold temperatures for an extended period of time. In addition, the visibility of the numbers on the LCD may decrease slightly.
RADIO OPERATION Seek Tuning ❶ Press the up or down tuning button momentarily to seek the next strong station in the current band. Manual Tuning ❶ 1. Press the up or down tuning buttons for more than two seconds to select manual tuning mode. "MANUAL" will appear momentarily on the display. 2.Press the up or down tuning buttons momentarily to move radio frequency up or down one step at a time. 3.Press and hold the up or down tuning buttons to quickly advance to a certain frequency.
CD PLAYER OPERATION Insert CD With the label surface facing up, gently insert the disc into the slot until the soft-loading mechanism engages and disc play begins. "S-CDP" will appear in the display momentarily, and the CD icon will become animated. "CDP" will appear in the display momentarily with the track number and elapsed time. Note: The unit is designed for play of standard 5" (12 cm.) compact discs only. Do not attempt to use 3" (8 cm.
WIRED REMOTE CONTROL (REMMS1500 OPTION) SPECIFICATIONS Mounting Remote The REMMS1500 comes with an aluminum mounting bracket that has 4 (four)notches cut into it so the bracket can be broken away for different mounting depths. CD Signal-to-noise ……………………………………………………………………………………>86dB Frequency response………………………………………………………………20Hz-20kHz, ±3dB Channel separation @ 1kHz ……………………………………………………………………>65dB D/A converter ……………………………………………………………………………………1 Bit/CH FM Tuner Tuning range ………………………………………………………………………87.
12