Operating Manual

1
Introduction
21
A2
D-Range
Settings
Highlight
Correction
*2
Expands the dynamic range and prevents overexposed areas
from occurring.
Auto
p.59
Shadow
Correction
*2
Expands the dynamic range and prevents underexposed areas
from occurring.
Auto
ISO AUTO Setting
*2
Sets the range of automatic correction in ISO AUTO and the
AUTO ISO Parameters.
ISO 100 to ISO
3200/Standard
p.41
High-ISO NR
*2
Sets the Noise Reduction setting when shooting with a high ISO
sensitivity.
Auto p.42
Slow Shutter Speed NR
*2
Sets the Noise Reduction setting when shooting with a slow
shutter speed.
Auto p.39
Program Line Selects the Program Line setting. Normal p.39
GPS
GPS Logging Sets the logging interval and duration.
15sec./1hr./
SD1
p.64
ASTROTRACER Sets whether to track and capture celestial bodies. Off p.65
Calibration Performs a calibration. – p.63
Additional
Settings
Sets whether to enable the GPS time synchronization and GPS
indicator lamp.
On/On p.63
A3
Live View
Contrast AF
*2
Sets the autofocus mode for shooting with Live View. Face Detection p.46
Focus Peaking
*2
Emphasizes the outline of the subject in focus and makes it easier
to check the focus.
Off p.46
Grid Display Displays the grid during Live View. Off
p.11
Histogram
Display
Displays the histogram during Live View. Off
Highlight Alert Sets overexposed areas to blink red during Live View. Off
Composition
Adjust.
Allows you to adjust the composition of your image using the
Shake Reduction mechanism.
Off p.61
Electronic
Level
Viewfinder
Displays the electronic level in the EV bar scale in the viewfinder
and/or LCD panel.
Off p.17
Live View Displays the electronic level during Live View. On p.11
Horizon Correction Corrects horizontal tilt when in A mode. Off –
AA Filter Simulator
*2
Applies a low-pass filter effect using the Shake Reduction mechanism. Off p.61
Shake Reduction
*2
Activates the Shake Reduction function. On –
Input Focal Length
Sets the focal length when using a lens of which focal length
information cannot be obtained.
35mm
p.90
Menu Item Function Default Setting Page