Operating Manual

1
26
Introduction
E2
8. Bracketing Order Sets the order for Exposure Bracketing shooting.
0 - +
p.51
9. One-Push Bracketing
Shoots all frames with one release when using Exposure Bracketing.
Off p.51
10. WB Adjustable Range
Sets whether to automatically fine-tune the white balance when
the light source is specified for the white balance setting.
Fixed p.55
11. WB When Using Flash Sets the white balance setting when using a flash.
Auto White
Balance
p.55
12. AWB in Tungsten Light
Sets the tungsten light color tone when the white balance is set to
[Auto White Balance].
Strong
Correction
p.55
13. Color Temperature Steps
Sets the adjustment steps for the Color Temperature option of the
white balance.
Kelvin p.56
14. Superimpose AF Area Displays the active AF point in red in the viewfinder. On p.16
E3
15. AF.S Setting
Sets the action priority for when the autofocus mode is set to
x and the shutter release button is fully pressed.
Focus-priority p.45
16. 1st Frame Action in AF.C
Sets the action priority for the first frame when the autofocus mode
is set to y and the shutter release button is fully pressed.
Release-
priority
p.45
17. Action in AF.C Continuous
Sets the action priority during Continuous Shooting when the
autofocus mode is set to y.
Focus-priority p.45
18. Hold AF Status
Maintains the focus for a certain amount of time when the subject
happens to move out of the selected focusing area after being focused.
Off p.45
19. AF with Remote Control
Sets whether to use autofocus when shooting with a remote
control unit.
Off p.50
20. Color Space Sets the color space to use.
sRGB
21. LCD Panel Illumination Sets the illumination for the LCD panel. High p.17
E4
22. Save Rotation Info Saves rotation information when shooting. On p.69
23. Save Menu Location
Saves the last menu tab displayed on the monitor and displays it
again the next time F is pressed.
Reset Menu
Location
p.19
24. Catch-in Focus
Enables Catch-in Focus shooting when a manual focus lens is
attached. The shutter is released automatically when the subject
comes into focus.
Off
25. AF Fine Adjustment
Allows you to precisely fine tune your lenses with the camera’s
autofocus system.
Off p.47
26. Using Aperture Ring
Enables the shutter to release when the lens aperture ring is set
to a position other than 9 (Auto).
Disable p.89
Reset Custom Functions
Resets all the settings of the Custom Setting menus to the defaults.
––
Menu Item Function Default Setting Page