Operating Manual

Getting Started

We recommend the use of the optional AC adapter kit K-AC132

when using the monitor for a long time or when connecting the

camera to a computer or AV device.

1 Make sure that the camera

is turned off, and open the

terminal cover.

2 Align the A marks on the

DC terminal of the AC

adapter and DC input

terminal of the camera, and

connect.

3 Connect the AC adapter to the AC plug cord, and

plug the cord into the power outlet.

u Caution

• Make sure that the camera is turned off before connecting or

disconnecting the AC adapter.

• Make sure that connections are secure between the

terminals. The memory card or data may be corrupted if the

connection to the power supply is lost while the card is being

accessed.

• Be sure to read the manual of the AC adapter kit before using

the AC adapter.

The following memory cards can be used with this camera.

• SD Memory Card, SDHC Memory Card, and SDXC Memory

Card

• Eye-Fi card

• Flucard compatible with this camera

In this manual, these cards are referred to as memory cards.

1 Make sure that the camera is turned off.

2 Slide the memory card

cover in the direction of 1

and then rotate it to open

as shown by 2.

3 Insert the card all the way

into the memory card slot

with the memory card label

facing toward the side with

the monitor.

To use an Eye-Fi card or a

Flucard, insert the card in the

SD2 slot.

Push the memory card in once

and release to remove.

Using the AC Adapter

Inserting a Memory Card