Operating Manual

3
Shooting
42
You can set the Noise Reduction
setting when shooting with a high ISO
sensitivity in [High-ISO NR] of the
A2 menu or the control panel.
When [Custom] is selected, select
[Setting] and set the noise reduction
level according to the ISO sensitivity.
Choose the part of the sensor to use for measuring brightness
and determining exposure.
1 Turn R while pressing
2.
Noise Reduction when Shooting with
a High ISO Sensitivity
A2/v
Auto
Applies Noise Reduction at optimally calculated
levels throughout ISO range.
Low/
Medium/
High
Applies Noise Reduction at constant chosen level
throughout ISO range.
Custom
Applies Noise Reduction at user-defined levels for
each ISO setting.
Off Does not apply Noise Reduction at any ISO setting.
High-I SO NR
High-ISO NR
Auto
Auto
Low
Low
Medium
Medium
High
High
Custom
Custom
Off
Off
Cancel
Cancel
OK
OK
High-I SO NRHigh-ISO NR
ResetReset
1 2
100100
200200
400400
800800
16001600
32003200
64006400
AE Metering
A
Multi-
segment
Meters the brightness in multiple different
zones of the sensor.
In backlit conditions, this mode automatically
adjusts exposure.
B
Center-
weighted
Meters the brightness with an emphasis on the
center of the sensor.
The sensitivity increases at the center and no
automatic adjustment is performed even in
backlit conditions.
C Spot
Meters the brightness only within a limited
area at the center of the sensor.
Useful when the subject is small.
12 34 5
12345
12 34 5
12345
1/
1/
F
F
25 0
250
32 00
3200
5.6
5.6