Operating Manual
3
Shooting
50
1 Press A in standby mode.
The Drive Mode screen appears.
2 Select Q and press B.
3 Select Q, R, or S and press E.
The camera returns to standby mode.
The self-timer lamp blinks.
4 Press the shutter release button halfway.
5 Point the remote control unit towards the remote
control receiver on the front or back of the
camera, and press the shutter release button on
the remote control unit.
t Memo
• The maximum operating distance of the remote control unit is
approx. 4 m from the front of the camera and approx. 2 m
from the back of the camera.
• To adjust focus with remote control, set in [19. AF with
Remote Control] of the E3 menu.
• When using the Remote Control Waterproof O-RC1, the
autofocus system can be operated with the q button on the
remote control unit. The r button cannot be used.
1 Press A in standby mode.
The Drive Mode screen appears.
2 Select T and press B.
3 Select T, 1, or U and press B.
4 Use Q to select the number of shots.
Select from [2 images (+)], [2 images (-)], [3 images], or [5
images].
5 Set the bracket value.
Available operations
6 Press E.
The camera returns to standby mode.
7 Take the set number of pictures.
After pictures are taken, the camera returns to standby
mode in Step 6.
Remote Control
Remote Contr olRemote Control
CancelCancel OKOK
Exposure Bracketing
R
Changes the bracket value (up to
±2 EV).
JR
Adjusts the exposure
compensation value.
M
Resets the compensation value to
the default setting.
Exposu re Bra cketin gExposure Bracketing
CancelCancel
3 imag es3 images
OKOK
±0.3EV±0.3EV