Operating Manual
3
Shooting
54
5 Press the shutter release button to start
shooting.
When [Start Interval] is set to [Now], the first picture is taken.
Instant Review is displayed, and then the monitor turns off.
To cancel shooting, press the shutter release button
halfway, and press F in standby mode.
After the set number of pictures are taken, the camera
returns to standby mode.
t Memo
• The shortest interval times that can be set for [Interval] are 10
and 20 seconds for [Digital Filter] and [HDR Capture] of the
C1 menu, respectively.
1 Press C in standby mode.
The White Balance setting screen appears.
2 Select the desired white
balance setting.
Available operations when shooting with the
viewfinder
Proceed to Step 5 if you do not need to fine-tune the white
balance.
Setting the White Balance
g
g Auto White Balance
u Multi Auto White Balance
h
Daylight
i
Shade
j
Cloudy
k
q Fluorescent - Daylight Color
r Fluorescent - Daylight White
s Fluorescent - Cool White
t Fluorescent - Warm White
l
Tungsten
m
Flash
n
Color Temperature Enhancement
o
Manual White Balance 1 to 3
p
Color Temperature 1 to 3
Main switch to U Uses Digital Preview to preview
the background image with the
white balance setting applied.
H
Saves the preview image (only
when the image can be saved).
Auto W hite B alance
Auto White Balance
Cancel
Cancel
Check
Check
WB
±
WB
±
OK
OK