Operating Manual
3
Shooting
55
3 Press G.
The fine-tuning screen appears.
Available operations
4 Press E.
The screen of Step 2 reappears.
5 Press E.
The camera returns to standby mode.
u Caution
• The Digital Preview operation in Step 2 cannot be performed
when the drive mode is set to [Multi-exposure], [Interval
Shooting], or [Interval Composite].
t Memo
• When u is set, even if various light sources are present at
the shooting location, the camera automatically adjusts the
white balance according to the light source of each area. (u
is not available in C mode.)
• The following settings for the white balance can be set in the
E2 menu.
You can measure the white balance at a selected location.
1 Select o in Step 2 on “Setting the White
Balance” (p.54) and press B.
2 Select from o1 to o3.
3 Under the light you wish to measure the white
balance of, select a white area as the subject,
and press the shutter release button fully.
The captured image is displayed.
4 Use ABCD to specify the measuring area.
5 Press E.
The White Balance setting screen reappears.
[The operation could not be completed correctly] appears
when measuring is unsuccessful. Press E to remeasure
the white balance.
t Memo
• You can copy the white balance settings of a captured image
and save them as o1 to o3 in [Save as Manual WB] of the
playback mode palette. (p.66)
AB
Adjust: Green-Magenta
CD
Adjust: Blue-Amber
M
Resets the adjustment value to the default
setting.
10. WB Adjustable Range
Fixed, Auto Adjustment
11. WB When Using Flash
Auto White Balance, Multi
Auto White Balance,
Flash, Unchanged
12. AWB in Tungsten Light
Strong Correction, Subtle
Correction
13. Color Temperature Steps Kelvin, Mired
Cancel
Cancel
±
0
±
0
G3
G3
A2
A2
OK
OK
Check
Check
Adjusting the White Balance Manually
Manual White Balan ce
Manual White Balance
Cancel
Cancel
Adjust
Adjust
WB
±
WB
±
OK
OK
Check
Check