Operating Manual

3
Shooting
56
Specify the white balance with the color temperature.
1 Select p in Step 2 on “Setting the White
Balance” (p.54), and press B.
2 Select from p1 to p3.
3 Press G.
4 Adjust the color
temperature.
Set the color temperature value
within the range from 2,500K to
10,000K.
Available operations
5 Press E.
The White Balance setting screen reappears.
t Memo
• Select [Mired] in [13. Color Temperature Steps] of the E2
menu to set the color temperature in mired units. The color
temperature can be changed in 20 mired units with Q , and
100 mired units with R. However, figures are converted to
and displayed in Kelvin.
When you want to take pictures with a slightly different style,
you can set the desired picture style before shooting.
Try out the various settings, and find your best picture style.
1 Press D in standby mode.
The Custom Image setting screen appears.
2 Select an image finishing
tone.
Available operations when shooting with the
viewfinder
Proceed to Step 6 if you do not need to change the
parameters.
Adjusting the White Balance with Color
Temperature
Q
Changes the color temperature in
increments of 100 Kelvin.
R
Changes the color temperature in
increments of 1,000 Kelvin.
ABCD
Fine-tunes the color temperature.
Cancel
Cancel
Check
Check
± 0
± 0
± 0
± 0
± 0
± 0
OK
OK
Controlling the Image Finishing
Tone
Custom Image
Bright (default setting)
Natural
Portrait
Landscape
Vibrant
Radiant
Muted
Bleach Bypass
Reversal Film
Monochrome
Cross Processing
Main switch to U Uses Digital Preview to preview
the background image with the
selected setting applied.
H
Saves the preview image (only
when the image can be saved).
Bright
Bright
Cancel
Cancel
OK
OK
Parame ter Adj.
Parameter Adj.
Check
Check