Operating Manual

3
Shooting
59
Expands the dynamic range and enables a wider range of tones
to be recorded by the CMOS sensor and reduces the
occurrence of overexposed/underexposed areas.
Set the correction functions from [D-Range Settings] of the A2
menu or the control panel.
u Caution
• When the sensitivity is set to less than ISO 200, [Highlight
Correction] cannot be set to [ON].
t Memo
• [Highlight Correction] in C mode can be set to [AUTO] or
[OFF].
Takes three consecutive images at three different exposure
levels to create a single composite image with them.
1 Select [HDR Capture] in A1 menu and press D.
The [HDR Capture] screen appears.
2 Select the capture type and
press E.
3 Set the range in which to change the exposure in
[Exposure Bracket Value].
Select from [±1EV], [±2EV], or [±3EV].
4 Set whether to use Auto Align or not.
5 Press F twice.
The camera returns to standby mode.
u Caution
• HDR Capture is not available in T, M, or N mode.
• This function cannot be used in combination with some other
functions. (p.87)
• When the drive mode is set to [Interval Shooting], [Auto Align]
is fixed to S (Off).
•In C mode, HDR Capture is available only when the drive
mode is set to [Interval Movie Record].
• For HDR Capture, multiple images are combined together to
create a single image, so it may take time to save the image.
Correcting Images
Brightness Adjustment
Highlight Correction/Shadow Correction A2/v
HDR Capture A1/v
Cancel
Cancel
OK
OK
HDR Ca pture
HDR Capture
Exposu re Bra cket Value
Exposure Bracket Value
Auto Align
Auto Align
HDR Ca pture
HDR Capture
T
Uses Auto Align.
S
Does not use Auto Align.