Operating Manual

3
Shooting
65
1 Set the Exposure Mode to M and set the Focus
Method to w.
2 Press 4.
3 Select [GPS] in A2 menu and press D.
The [GPS] screen appears.
4 Select [ASTROTRACER] and press D.
5 Select a and press E.
6 Select [Precise Calibration] and press D.
Refer to “Performing a Calibration” (p.63).
7 Press F twice.
The camera returns to standby mode.
8 Set the shooting
conditions.
Available operations
9 Adjust the focus and press the shutter release
button fully.
Shooting starts.
10 Press the shutter release button fully again.
Shooting stops.
When the timed exposure is enabled, shooting stops
automatically after the set time has elapsed.
u Caution
• This function cannot be used in combination with some other
functions. (p.87)
Shooting Celestial Bodies
(ASTROTRACER)
A2
Enable s A STROTR ACER f uncti o n
Enables ASTROTRACER function
in Bul b mode to el imina t e sta r
in Bulb mode to eliminate star
trails durin g time d exp o sures
trails during timed exposures
GPS
GPS
GPS Lo gging
GPS Logging
ASTROT RACER
ASTROTRACER
Calibr ation
Calibration
Additi onal S etting s
Additional Settings
M Enables/Disables the timed exposure.
Q Changes the exposure time within the range
from 0'10" to 5'00" when the timed exposure
is enabled.
R Changes the aperture value.
12 34 5
12345
12 34 5
12345
-
-
--
--
'
'
"
"
F
F
10 0
100
8.0
8.0