Users Manual

Edge Intelligent Controller

ASAM-RFUH-EIC01 Xi’an Aerospace Automation Co., Ltd

Summary

The ASAM-RFUH-EIC01 Edge Intelligent Controller is a high-performance, wide-band

and scalable UHF RFID device that complies with the EPC global C1 Gen2 / ISO

18000-6C protocol standard. The device has edge computing capability, possesses

strong capability of single and multi-tag reading, RF output power is adjustable, the

device supports RS232, RS485, Ethernet and other communication interfaces, and it

possesses multy features such as relay output control, optocoupler input, power

indication, read status indicator.

Application

The ASAM-RFUH-EIC01 Edge Intelligent Controller can be used in production

process control, vehicle management, logistics management, warehouse

management, access control and many other applications.

Product characteristics

1.Agreement:Electronic tags conforming to EPC-CLASS1-G2 (ISO18000-6C)

ISO18000-6B standards.

2.Working frequency 902-928MHz/865-868MHz (adjustable according to different

countries or regions)

3.Supporting dynamic parameter a

djustment (e.g. power adjustment, frequency

adjustment, etc.)

4.Supporting digital input/output control interface, directly expanding other

equipment

5.Read distance up to 10 meters (related to tag and RF output power)

6.Antenna number：1-8 external antennas

7.Supporting Standard Ethernet Port Communication and Serial Port Communication

8.Supporting multiple working modes (active mode, answer mode)

9.Working in a broad-spectrum frequency hopping (FHSS) or fixed-frequency

transmission mode

10. Easily install and debug with special UHF configuration software

11. Protection level: IP54.

PAGE 1
Edge Intelligent Controller ASAM-RFUH-EIC01 Xi’an Aerospace Automation Co., Ltd Summary The ASAM-RFUH-EIC01 Edge Intelligent Controller is a high-performance, wide-band and scalable UHF RFID device that complies with the EPC global C1 Gen2 / ISO 18000-6C protocol standard.
PAGE 2
Technical parameter  Type: ASAM-RFUH-EIC01  Transmission frequency: 902MHz-928MHz, 865-868MHz.  Complying with EPC global UHF Class1 Gen2/ISO18000-6C standard  Read-write distance: The maximum reading distance can be up to 10 meters.
PAGE 3
6. Ethernet interfaces 7.External antenna interface 1 8. External antenna interface2 9. External antenna interface3 10. External antenna interface4 11. External antenna interface5 12. External antenna interface6 13. External antenna interface7 14. External antenna interface8 15. Input power interface 16.Trademark 17.Mounting holes Packing list Category ASAM-RFUH-EIC01 Network Cable RS232 Serial Cable AC100V-240V Power Cable Number 1 1 1 1 Remarks Main Engine Network Cable Length 1.
PAGE 4
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.