Hub User's Manual AsantFAST 100, AsantFAST 100 TX

Modules
Page 4-5
Modules
This menu provides read-only information on each group within the
device.
Table 4-4 describes each field in the Modules menu.
∆ Note: For instructions on using this menu, see “Viewing
Module Information” on page 3-15.
Table 4-4 Modules Menu
Field Description
Group Index Read-only field; displays the number of the selected
group.
Number of Ports Read-only field; displays the total number of ports in
the group.
Module Type Read-only field; displays the type of module of the
selected group. For example, FastHub100 or Manage-
ment Module.
Note: The table displays entries for groups 1 through
15; a module type of empty means that there is physi-
cally no group in that position in the device. See
“Group Numbering” on page 3-3 for more informa-
tion on groups and group numbering.
Description Read-only field; displays a description of the group.
HW Revision
Number
Read-only field; displays the hardware revision num-
ber of the device.
State Read-only field; displays the state of the module.
❏ OK — the module is not a “master” module (it
does not manage other devices within the
stack) and is currently operating.
❏ Fail — a problem with the module’s board has
been detected.
❏ Master NMM — the module is a “master”
module (it manages other devices in the
stack).
❏ Standby NMM — the module is capable of
being a “master” module.
100NMM PM book Page 5 Wednesday, August 27, 1997 12:40 PM