- Asant Technologies Mini MAU Installation Guide

Mini MAU Page 14
❖
Note: If the MAU is used with a hub
or repeater this switch should be
disabled.
❖
Link Integrity Enabled Test Switch
This switch is normally enabled to verify
cable link. This switch can be disabled to
work with non-10BaseT compliant
repeaters and hubs.
Polarity Correction
This switch, when enabled, inverts the
polarity of a signal automatically if a
received signal has reverse polarity. Wir-
ing problems cause reverse polarity.
❖
Note : If you use the MAU with an
AsantéHub leave the Polarity Cor-
rection Switch enabled. ❖
minimau Page 14 Monday, August 26, 1996 11:02 AM