Owner's manual

Page 6
AsantéHub 2072 Network Management Module Installation Guide
Installation The NMM installation consists of:
❏ Grounding yourself
❏ Checking package contents
❏ Installing the module and checking its LEDs
❏ Connecting the module to other devices
Grounding Requirements Before unpacking or handling the module, you must attach the
grounding strap (provided in the package) to your wrist to dis-
charge static electricity from your body or clothes. Attach the
clamp end to the hub chassis, which should already be grounded
properly.
Checking Package
Contents
The Asanté AH 2072 NMM package contains the following items:
❏
Warranty card
❏
This installation guide
❏
AsantéHub 2072 NMM in anti-static packaging
There may also be a “Read Me First” sheet in the package. Always
read the “Read Me First” document before you install. It contains
the most up-to-date information about your installation (this infor-
mation may not be included in the manual).
Warranty Card Filling out your warranty card and sending it in promptly is impor-
tant. If you do not send it in within 30 days after the date of pur-
chase, you may not be eligible for the NMM’s 5-year warranty.
Installing the NMM This installation assumes that you have already installed the
AsantéHub
2072 or NetStacker chassis. To install the NMM, do the
following steps:
1
Observing the anti-static grounding procedures (see
“Grounding Requirements” earlier in this document),
remove the module from its anti-static packing.
∆
Handle the module only by its edges. Do not
touch chips or connectors.
▲ Do not force the module into a slot. Forcing the
module into a slot can damage the backplane.