Specifications

B - 18 WFPEEUI220001C0
ECCP Board Diagnostics - The DUALUTIL Utility
Start Board
After an ECCP board has been reset as described in Reset
Reset Reset
Reset
Board
BoardBoard
Board, use the start board operation to restore the ECCP
board to its operational state.
Encoding Enabled and Encoding Disabled
When Encoding Enabled (default) is selected, transmissions
from the ECCP board are sent redundantly on the Cnet (i.e.,
transmissions are sent on both Highway 1 and Highway 2).
When Encoding Disabled is selected, transmissions will be sent
only on one highway, typically Highway 1.
Discard Receive List
Information about other nodes on the Cnet, which have been
recognized by the ECCP board, is stored locally on the ECCP
board. Click Discard Receive List to discard this information.
This item is intended for use by ABB personnel only.
Read Event
As the presence of new nodes and absence of known nodes on
the Cnet is detected, this information is stored as event infor-
mation in the memory on the ECCP board. Use Read Event to
read the event information stored on the local node. Informa-
tion about resets and restarts to the local ECCP board is also
stored as event information. This item is intended for use by
ABB personnel only.
Read Message
Read Message is used to read messages contained in the ECCP
console serial device. This item is intended for use by ABB per-
sonnel only.
Read Node Status
Node status information on all known nodes is stored in the
receive list. This data is accessed via the Read Node Status
operation. This operation is provided for use by ABB personnel
engaged in obtaining diagnostic information.