Specifications

ECCP Software Installation
WFPEEUI220001C0 B - 9
13. A pop-up window will provide the opportunity to restart the
computer. The computer must be restarted for the newly
installed software to take effect.
Initial ECCP Software Installation (Windows 2000)
If the ECCP software has not previously been installed on the
system, perform the following steps to install it on Windows
2000.
1. Load the CD-ROM disk containing the Conductor NT soft-
ware into the CD-ROM drive.
2. Exit the automatic loading program (Do not load Conductor
NT).
3. Select Start > Settings > Control Panel.
4. In the control panel window, double click Administrative
Tools. The administrative tools window will be displayed.
5. Double-click the computer management icon.
6. Double-click the device manager icon.
7. Double-click PCI device.
8. Select the driver tab.
9. Click Update Driver.
10. Click Next in the upgrade hardware device driver wizard
dialog box.
11. Enable Display a list of the known drivers for this device.
12. Click Next.
13. Select Network Adapter from the list of devices.
14. Click Next.
15. Click Have Disk in the select network adapter dialog box.
16. Insert the manufacturer’s disk and enter the CD-ROM
drive specification, followed by the directory
i386\ECCP\WIN2000
i386\ECCP\WIN2000i386\ECCP\WIN2000
i386\ECCP\WIN2000. For example, if the CD-ROM is drive
D:, enter:
D:\i386\ECCP\WIN2000