Installation guide

Page 4-2
Troubleshooting
Tx/Rx (Data Traffic Indicator)
The green Tx/Rx LED indicates the activity (transmit data) status of the
AsantéHub. This LED should blink when data packets are being transmitted
or received from any port (i.e. AUI, BNC or an RJ-45 port).
COL LED
The red COL LED is normally off when the network is not active.
State Description
Blinking • Data packets being transmitted or received
Off • Power off
• No data packets being transmitted or received
State Description
On • Illuminates when collisions are detected on the network.
Off • Network functioning properly.
• Network not active.