Setup guide

21
Asanté IntraCore 35516 Series Switches
After connecting to the console, a prompt like the following will ap-
pear:
By default, the password assigned to the console line is Asante
(case-sensitive). Type it at the prompt and press Enter. See the
User’s Manual for instructions on how to change the password. The
default password for telnet access (vty0) is Asante (case-sensitive).
2.13 Configuring an IP Address
The switch ships with a default IP address of
192.168.0.1
. Follow
the steps below to change the switch’s IP address.
1. Connect to the console and press
Enter
at the Password
prompt, as described above.
2. The screen will display the user mode prompt, Router>.
3. Type enable. The new prompt is Router#.
4. Type configure terminal. The new prompt is
Router(config)#.
User Access Verification
Password: