User`s manual

User’s Manual 301
counters Statistics for LACP protocol messages.
internal Configuration settings and operational state for local side.
neighbors Configuration settings and operational state for remote side.
sysid Summary of system priority and MAC address for all channel groups.
Default
Port Channel: all
Command Mode
Privileged Exec
Example
The following is sample output from the show lacp command.
Console#show lacp 1 counters
Channel group : 1 -------------------------------------------------------------
------------
Eth 1/ 1 ----------------------------------------------------------------------
---
LACPDUs Sent : 21
LACPDUs Received : 21
Marker Sent : 0
Marker Received : 0
LACPDUs Unknown Pkts : 0
LACPDUs Illegal Pkts : 0
.
.
.
The following table describes fields shown in the show lacp counter display.
Field Description
LACPDUs Sent Number of valid LACPDUs transmitted from this channel group.
LACPDUs Received Number of valid LACPDUs received on this channel group.
Marker Sent Number of valid Marker PDUs transmitted from this channel group.
Marker Received Number of valid Marker PDUs received by this channel group.
LACPDUs Unknown
Pkts
Number of frames received that either (1) Carry the Slow Protocols Ethernet
Type value, but contain an unknown PDU, or (2) are addressed to the Slow
Protocols group MAC Address, but do not carry the Slow Protocols Ethernet
Type.
LACPDUs Illegal Pkts Number of frames that carry the Slow Protocols Ethernet Type value, but contain
a badly formed PDU or an illegal value of Protocol Subtype.