Operating Instructions

5 Installation and commissioning
Edition EN 2020/07 CARSHARING ZUSATZKARTENLESER Operating Instructions
12/22
5 Installation and commissioning
5.1 Commissioning
Following steps, only be carried out by the service technician.
 Push the locking clips inwards and lift the top shell lightly – fig. 5.1
 Housing is now open – fig 5.2
 Remove the upper shell
 Remove the PCB from the lower shell.
 Caution: do not damage the micro switches (PCB top & bottom)
 Insert the battery into the battery holder
 Insert the PCB into the lower shell
 Connect upper with lower shell and close the housing
 Glue the supplied adhesive tapes to the defined position on the
lower shell of the ZKL – fig 5.3
 Fix the ZKL to the defined position in the vehicle
Fig. 5.1 Locking Clips