_ MISCONSTRUCTIONS CAUTION To reduce the risk of fire or injury to persons, read and follow these instructions: TELEPHONE WIRING AND JACK INSTALLATION > Use caution when installing or modifying telephone lines, > Never install telephone wiring during an electrical storm. > Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. > Never touch UN-insulated telephone wires or terminals unless the telephone ine is disconnected at the network interface.
— SAPETYNSIRMCTIONZ GARY CONSTRUCTIONS CAUTION To reduce the risk of fire or injury to persons, read and follow these instructions: TELEPHONE WIRING AND JACK INSTALLATION > Use caution when installing or modifying telephone lines. > Never install telephone wiring during an electrical storm. > Never install telephone jacks in wet locations unless the Jack is specifically designed for wet locations.
INTRODUCTION 1 BASIC OPERATIONS S— 12 Making a Call 2 Redialing Off-hook Dialing Dialing Screen Features Active Call Muted Call Dialing Extra Digits 3.
TRANSDUCTION INTRODUCTION Your Paraffin comes with a handset module and a base. Plug the handset module to the Visor™ handheld and you are ready to operate all telephone features with touchscreen control. You can monitor the on screen display of the name of the calling party for incoming calls as well as for call waiting. The LED indicator on your handset module alerts you of incoming calls or unheard voice mails.
SRLUNLSIARIER — on _— Base The Page/Sync Button facilitates synchronization while the Visor™ The IN USE/CHARGE fight comes handheld is placed on the Docking on whenever this phone is used or Cradle, when the handset is being charged. It blinks when there is an incoming call. Corking Contacts paraffin SETTING STARTED : The TONE/PULSE switch on the back lets you choose between tone service or rotary/pulse service.
SETTING STARTER Handset Module The handset module contains an LED indicator, a buzzer, an earpiece and a headset jack as user interface. it must be plugged into the Visor™ handheld to operate as a conventional cordless handset but it can be recharged with or without the Visor™ handheld attached.
Plugging in the Handset Module > Remove the Springboard™ expansion slot door. > Plug the Paraffin handset module securely into the Springborad™ expansion slot. A new icon > will appear in the Applications Launcher for Paraffin application.
— —GELIINGSIARIER 5 Charging and Syncing The base serves as the Charging Cradle for the handset module and a Docking Cradle for the Visor™ handheld. Both of them can be docked independently. The Docking Cradle serves as an interface for data synchronization with the PC. The USE Connector Cable links the cradle to the USB port of the PC.
BASIC PERORATIONS BASIC OPERATIONS Once you plug the handset module securely into the Visor™ handheld, the Paraffin application icon & appears in the Applications Launcher. The phone app is automatically launched and the starting view appears. The Speed Dial View is the starting view when the phone application is launched. You can choose the Speed Dial View, Dial Pad View or Call History View by tapping one of the three Screen Push Buttons.
LE} BASIL OPERATIONS Redialing > Select Dial Pad View > Pr-dial a number by tapping the Number Buttons > Edit the number by inserting the cursor at the desired position > Tap ¢* and the number will be dialed out automatically > Tap [. ] to change the Initial pulse dialing mode to tone temporarily.
_ malocclusion Muted Call > Tap Mute to mute the call > Tap Mute to return to the Active Call Screen Mute Icon indicates call is muted Muted Cal Dialing Extra Digits > Tap Key Pad on the Active Cali Screen to move to the Key Pad Screen > Tap the Number Buttons to generate touch tones for entering selections in an audio menu, e.g.
BARS. ALTERATION Incoming Call When there is an incoming Cali, the LED indicators on both the handset module and the base blink. The Phone Call Alert Screen appears and displays the Caller 10* or Caller 1D on Call Waiting* > Tap Answer to accept the call or > Tap ignore to ignore the call and return to previous screen. The call is NOT disconnected. The buzzer is temporarily muted while the LED keep blinking until the caller hangs up.
CONSIDERATIONS Out of Range Alert Out of Range Alert During phone mode, the handset module will emit a warning tone if iris too far from the base. The calf will terminate in 3 minutes if the handset module remains out of range. Low Battery Alert During phone mode, the handset module will emit a warning tone and the Low Battery icon will appear if the battery is low and needs recharging.
TROUBLESHOOTING TROUBLESHOOTING #f you encounter any problems, please visit our Web site, www.arkonnetworks.com, to obtain the latest information about troubleshooting your Paraffin and Frequently Asked Questions. You can also seek technical support from us by dialing 1 (877) 992-7566. The following are some of the most common problems and solutions: > If the Paraffin app icon does not appear when the handset module is inserted...
.tongueless 0 > If the phone has static or fades in and out... o Change the operating channel o Be sure you are not out of range 0 the base o Adjust the base antenna © Be sure the handset module is fully charged o Change the base location if the handset module does not charge...
_ INTERCOMMUNICATION 00 [ECHNICALJNFQRMALION FEDERAL COMMUNICATIONS COMMISSION / INDUSTRY CANADA REQUIREMENTS The equipment complies with Part 68 of FCC Rules. The marking on the base unit of this equipment contains, among other information, the FCC Registration Number and the Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this informs: son to your telephone company.
-IECHNICALINFQRMATIQN sons, may give the telecommunications company cause to request the user to disconnect the equipment. Interference This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. This device complies also with RS-210 of Industry Canada.
MAHARANI WARRANTY Akron Networks Inc. One-Year Limited Warranty This limited warranty sets forth all Akron Networks Inc. responsibilities regarding your Paraffin. There are no other expressed or implied warranties from Akron Networks nc, Warranty Service Provided if you purchased the Paraffin new from a retail vendor, Akron Networks Inc. warrants the telephone against defects in material and workmanship for a period of one (1) year from the original date of purchase.