User's Manual

Menu options

4 Press the MENU button (B-2) again to exit the menu.

Note:Always press the buttons MENU (B-2), – and + (B-10) and

OK (B-7) shortly.

Switching night light on/off

• Select Light on? or Light oFF?, using – and +

(B-10). Confirm with OK (B-7).

Playing lullabies

To play or stop a lullaby:

• Select LullabY , using – and + (B-10).

Confirm with OK (B-7).

• Select PlaY? to replay the last played lullaby or StoP

LullabY? to stop playback. Confirm with OK (B-7).

To select a different lullaby:

• Select LullabY , using – and + (B-10).

Confirm with OK (B-7).

• Select Select neW, using – and + (B-10).

Confirm with OK (B-7).

• Select the desired lullaby, using – and + (B-10).

Confirm with OK (B-7).

Adjusting microphone sensitivity

You can set the sound sensitivity of the baby unit to the desired

level.When set to the maximum sensitivity level all sounds

(including your baby’s breathing, when loud enough) can be

heard on the parent unit.You can only change the microphone

sensitivity if the connection between the baby unit and the

parent unit is established (when LINK lights (A-3, B-3) light

continuously green).

• Select SenSitiVitY , using – and + (B-10).

Confirm with OK (B-7).

• Select the desired sensitivity level for the baby unit

microphone, using – and + (B-10). Confirm with OK (B-7).

> Sensitivity 9 = minimum level / lowest sensitivity;

Sensitivity 9 9 9 9 9 =

maximum level / highest sensitivity

Note:When the sensitivity level of the baby unit is set to a high

level, the unit will consumes power because it is in

continuous transmission mode.