User's Manual
Table Of Contents
- Contents
- Introduction
- Packaging List
- Battery Charging
- Spare Battery Pack
- Belt Clip
- Headset (Optional)
- Strata Wireless IP Telephone
- Setup for New Users
- Vibrate Mode
- What’s My Line?
- Which Outgoing/Incoming Call Features Do I Have?
- Which Codes Do I Use?
- Unlock Telephone
- Soft Keys
- Flexible Buttons
- Making a Call
- Answering a Call
- Account Code Calls
- Call Transfer
- Conference Calls
- Hold
- Call Forward - Any Calls
- Call Park Orbits
- Call Pickup
- Echo Cancel
- Paging
- Redial
- Speed Dial
- One Touch Buttons
- Voice Mail Call Monitor
- Voice Mail - Direct Transfer
- Volume Control
- LCD Features
5 Draft - Wireless IPT Quick Reference Guide 10/04
Setup for New Users
Important! Ask your System Administrator if your WIPT has
been setup and ready to use. If the telephone is not
setup, then you will require the following
information – SSID, DHCP, Telephone IP address,
subnet mask, router address, Station ID, and the
IP Address for the BIPU.
³ To View your Wireless IP Setup
1. Press
Setup button. The Local Setup screen displays.
2. Use the S and T arrows to go through the different screens
or press End (On Hook).
Note The following screens display when using the Up/Down
arrows:
• SSID screen
• Boot option DHCP screen – To edit this screen press the Edit
soft key, make the change, then press SK1 (OK soft key).
• IP Settings screen
• Network Information and MAC Address screen
• LCD Contrast – You can adjust the contrast on your screen
using SK2 and SK3
• Flexible Button Label Editor screen – You can change the
labels of the flexible buttons on your screen. See “To Label
Flexible Buttons” on page 8.
Vibrate Mode
³ To enable, press Mute and S arrow.
³ To disable, press Mute and T arrow.
CIX-QR-WIPT2000.book Page 5 Tuesday, September 14, 2004 5:20 PM