User's Manual

Draft - Wireless IPT Quick Reference Guide 10/04 6
What’s My Line?
Throughout this guide, the word “line” is mentioned. Check mark
which Line type you have. For example, you will be instructed to
“select a line.” “Line” can be:
p Line button
p Pooled Line Group
p Group Line button
p Line out requiring an access code – where you enter an outside line or
line group access code (e.g., dial
9).
Which Outgoing/Incoming Call
Features Do I Have?
Check mark here which outgoing/incoming feature you have on
your system. Then go through the rest of this guide and check mark
that feature where it’s noted.
p Automatic Line Selection (ALS): For outgoing calls: You
have ALS if you hear dial tone and the Line LED lights steady
green when you press
Off-hook or press Spkr.
p Ringing Line Preference: You answer an incoming Line
ringing your station by pressing
Off-hook or Spkr.
p Tone Signaling: Internal/External incoming call: you hear
successive ring tones, then press
Off-hook or Spkr.
p Voice First Signaling: Internal incoming call: your phone does
not ring; instead you hear a long tone, then the caller’s voice.
Talk in the direction of your phone, or answer the call as you
normally would by pressing
Off-hook or Spkr.
Note You can change between Tone and Voice Signaling on a
call-by-call basis by pressing
1 after dialing an internal
telephone number.
p Hot Dialing: If your telephone is programmed for “hot
dialing,” you do not have to press
Spkr or go Off-hook before
dialing internal or external calls. When you dial a number, the
speakerphone automatically turns on and the Spkr lights up.
CIX-QR-WIPT2000.book Page 6 Tuesday, September 14, 2004 5:20 PM