User's Manual
- 37 -
Calling Features
Your phone supports a number of call-related features to help you handle and
manage your calls.
AUTO HANG UP
Auto hang up allows you to end a call by placing the handset on the base or
charging cradle without pressing any key.
Activating/Deactivating auto hang up
1. Press .
2. Select Personal set
Æ
Auto hang up. Press
OK
.
3. Select the new setting. Press
OK
. The setting is saved.
AUTO CONFERENCE
Auto conference lets you join an external call with another handset by simply
pressing
.
Activating/Deactivating auto conference
1. Press .
2. Select Advanced set
Æ
Conference. Press
OK
.
3. Select the new setting. Press
OK
. The setting is saved.
DIAL MODE
Dial mode is the telephone signal used in your country. Your phone supports tone
(DTMF) and pulse (rotary) dialing. Your phone shall already be set up for use in
your country. For details, consult your service provider.
Setting the dial mode
1. Press .
2. Select Advanced set
Æ
Dial mode. Press
OK
.
3. Select the new setting. Press
OK
. The setting is saved.
Calling Features
- 38 -
RECALL SELECTION
Recall is a signal that needs to be sent to the network when making or answering
a second call. Your phone shall already be set up for use in your country. For
details, consult your service provider.
Setting the recall duration
There are 3 recall time options: Short, Medium, and Long. The number of
available options varies with different countries.
1. Press
.
2. Select Advanced set
Æ
Recall time. Press
OK
.
3. Select the new setting. Press
OK
. The setting is saved.
CALL BARRING
Call barring allows you to block selected numbers from dialing out.
Activating/deactivating call barring
1. Press .
2. Select Advanced set
Æ
Call barring. Press
OK
.
3. Enter the system PIN. Press
OK
.
4. Select Mode. Press
OK
.
5. Select the new setting. Go to step 6 if you selected On or step 7 if
you selected Off.
6. Enter the barred number (if it is not set previously).
7. Press
OK
. The setting is saved.
TIP: Temporar
y
Tone. If your phone is in pulse dialing, press and hold
during a call for temporary tone mode. ‘d’ displays. Digits entered
after ‘d’ are sent out as tone signal (for this call only).