User's Manual

Getting Started
- 13 -
CHARGING YOUR HANDSET
1. Place the 2 rechargeable batteries
(included) into the battery
compartment.
2. Slide the battery door firmly into place.
3. Place the handset on the base unit or
charger for charging.
WARNING: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Never use non-rechargeable batteries. Use recommended type supplied with
this product. NiMH batteries must be disposed of in accordance with the
applicable waste disposal regulations.
NOTE: Charge the handset(s) for 24 hours before initial use!
NOTE: Handset may get warm during initial charging. This is normal.
The handset may take a few seconds to power up.
CAUTION: Check the battery polarity when inserting in the battery compartment.
Incorrect polarity may damage the product.
Getting Started
- 14 -
CHECKING THE BATTERY LEVEL
The battery icon displays the current battery level.
= Battery full = Battery empty. Require charging.
Your handset may power down shortly if it is not charged after the battery is
empty. If you are on the phone when the battery is nearly empty, you will hear
warning tones. Your call may be cut off shortly after the warning.
GREETING YOU WITH “WELCOME”
This feature only applies to model(s) with multiple
This feature only applies to model(s) with multipleThis feature only applies to model(s) with multiple
This feature only applies to model(s) with multiple-
--
-country or language support.
country or language support.country or language support.
country or language support.
At first startup, your handset greets you with a “Welcome” message. After the
welcome message, you can set the country or language to start using the phone.
Setting your country/language
It is necessary to set the correct country for the phone for it to work properly
according to your country’s standards.
After the welcome message,
1. Select your country or language.
2. Press OK to confirm. The country/language setting is saved.
After setting the country/language, you can set the date and time. Your phone is
now ready to use.
To re-configure your country or language setting, see Changing the country
setting on page 46 or Setting the display language on page 31.
NOTE: Date/Time.
Date/Time.Date/Time.
Date/Time. Press BACK to skip date/time setting.
NOTE: Press OK to skip the welcome message.