User's Manual

- 45 -
The System
REGISTERING ADDITIONAL HANDSET(S)
Registration allows communication between your base unit and handset(s). If
your handset is not registered, you will not be able to make a call or use some of
the functions and features on the phone.
1. Press on the base unit for 3 seconds.
2. Press
on the handset.
3. Select Advanced set
Advanced set Advanced set
Advanced set 

 Regist
Regist Regist
Registration
rationration
ration. Press OK .
4. Enter the system PIN (Pre-set: 0000). Use BACK to make
corrections.
5. Press OK . Your handset starts searching for the base.
Registration shall be completed within 60 seconds. The base
automatically assigns a handset number to the handset.
DELETING A HANDSET
Use one handset to de-register another handset that shares the same base unit.
1. Press .
2. Select A
AA
Advanced set
dvanced setdvanced set
dvanced set 

 U
UU
Unregister
nregisternregister
nregister. Press OK .
3. Enter the system PIN. Use BACK to make corrections.
4. Press OK . Select the handset (number) you want to delete.
5. Press OK . The handset is deleted.
NOTE:
Y
our base can register up to 5 handsets. After registering 5
handsets, your base unit registration memory is full. If you attempt to
register an additional handset, registration will not be successful.
TIP: Handset Numbe
r
Handset NumberHandset Numbe
r
Handset Number. The handset number displays beside the
handset name during standby.
The System
- 46 -
CHANGING YOUR PIN
The system PIN is used for registration and protecting access rights to some of
the menus and remote access to the ANSWERING MACHINE. The pre-set PIN is
0000. You can personalize your PIN for greater security.
1. Press .
2. Select A
AA
Advanced set
dvanced setdvanced set
dvanced set 

 Change PIN
Change PIN Change PIN
Change PIN. Press OK .
3. Enter the system PIN. Use BACK to make corrections.
4. Press OK to confirm the system PIN.
5. Enter the new system PIN. Press OK .
6. Enter the new system PIN again for verification. Press OK . The
setting is saved.
CHANGING THE COUNTRY SETTING
This feature
This feature This feature
This feature only applies
only appliesonly applies
only applies to model(s) with multiple
to model(s) with multiple to model(s) with multiple
to model(s) with multiple-
--
-country support.
country support.country support.
country support.
You can change the country setting of your phone when you are using it in
another country. If your handset displays W
WW
Welcome
elcomeelcome
elcome, refer to Greeting you with
“Welcome” on page 14.
1. Press
.
2. Select A
AA
Advanced set
dvanced set dvanced set
dvanced set 

 C
CC
Country
ountryountry
ountry. Press OK .
3. Select the new setting. Press OK . The setting is saved.
NOTE: Forgotten PIN
For
g
otten PINFor
g
otten PIN
Forgotten PIN. Write down your PIN and save it for future use. If
you have forgotten the PIN, reset your phone and your PIN code will be
restored to the factory pre-set PIN (0000). To reset your phone, see
Restoring default settings on page 47.