User's Manual

The Answering Machine
- 55 -
Accessing your answering machine remotely
1. Make a call to your home number from a touch tone phone.
2. Press
when the outgoing message starts playing.
3. Enter your PIN code. You now have access to your answering
machine, and new message(s) starts playing.
4. Press a key to carry out a function. See the Remote access
commands table below for a list of available functions.
Remote access commands
Key
KeyKey
Key Function
FunctionFunction
Function
1 Repeat current or play previous
message
2 Play messages
3 Skip to next message
6 Delete current message
7 Switch answering machine on
(not available during playback)
8 Stop message playback
9 Switch answering machine off
(not available during playback)
NOTE:
Y
our phone will hang up automatically if no key is pressed for 8
seconds.
NOTE:
Y
ou have 2 tries to enter the correct PIN code before your phone
hangs up.
- 56 -
Appendix
DEFAULT (PRE-PROGRAMMED) SETTINGS
General Setting
General SettingGeneral Setting
General Setting
Language Handset Name
Date Time
Date Format Time Format
Alarm Network Services
Backlight Contrast
Auto Hang Up Conference
Recall Time Dial Mode
Easy Call Area Code
Carrier Code Auto Prefix
First Ring Russian CID
Sounds Setting
Sounds SettingSounds Setting
Sounds Setting
Handset Ring Melody Handset Ring Volume
Alarm Tone Handset Key Beep
Receiver Volume XHD Sound
Call Log Setting
Call Log SettingCall Log Setting
Call Log Setting
Incoming Call Log Unchanged Dialed Call Log Unchanged
System Setting
System SettingSystem Setting
System Setting
Country PIN Code 0000
Answering Machine Setting
Answering Machine SettingAnswering Machine Setting
Answering Machine Setting
Answer Machine Status Voice Language
Base Call Screening Handset Call Screening
Message Alert Speaker Volume
Remote Access