User's Manual

22
QUICK REFERENCE GUIDE
Program Network
Services Number
• Press and hold → Press 5 → → Press
to erase digit or enter new number → Press
Program Service
Center Number
• Press and hold → Press 6 → → Press
to erase digit or enter new number → Press
Set Default Setting
• Press and hold → Press and hold 9 → Press
DEFAULT VALUE
Items Factory Default
Speaker Volume on Portable Part Medium
Ringer Volume Volume 3
Ringer Melody Melody 1
Dialing Mode Tone
Flash Duration Duration 1
Redial Record Empty
Phonebook Records Empty
User Phone Number Record Empty
Network Service Number Record Factory Default
Service Center Number Record Factory Default
TROUBLE SHOOTING
1. Check that the microphone is ON during the call. The GREEN
microphone indicators should be lit.
2. Check that the telephone line is connected between the socket on the
bottom of the base unit and to the wall phone socket.
3. Check that the mains adapter is connected to the base and POD units.
4. Keep noise equipment (e.g. a fan or computer) away from the base and
POD units to avoid excessive noise.
5. Terminate the call and call the other party again to see whether another
line provides a better conversation.
6. Speak closer to the POD for a better reception.
If you need any help, please call help line 1-866-537-0384.
Or, contact service center: Wave Industries Ltd.
333 SE 2
nd
Avenue, Portland, OR 97214
USA
www.waveindltd.com
TECHNICAL DATA
Audio Bandwidth 200 to 3800 Hz
Speaker Volume 90 dBspl A weighted
Power Supply 120 VAC, 7 VDC 400 mA (for Base)
120 VAC, 12 VDC 500 mA (for POD)
Battery pack of 6xAA size 1800 mAh (POD only)
Certification UL, FCC