User's Manual

CUSTOMER SERVICE: 800-695-2540
9
To avoid damage to the adjustable bed,
always open the carton while the bed
is laying in the FLAT position
on the floor.
IMPORTANT UNPACKING INSTRUCTIONS
OPEN FLAT
Carefully lift the bed frame unit out of the shipping
carton, keeping the unit top side down. For safety
reasons, this should be performed by 2 people.
STEP 1
.
Assembling Bed Legs:
Open the accessories box, take out the 4 legs,
and thread them in a clockwise direction into
the threaded holes in the frame.
STEP 2
NOTE: Tighten the legs securely to the frame.
Leave no space between leg and frame.
STEP 3
Remove and extend the power cord from the
frame.
WARNING:
POWER CORDS MUST NOT INTERFERE
WITH ANY ADJUSTABLE BED MECHANISMS.
Frame Assembly Instructions
Remove the plastic packaging from the
adjustable foundation.
STEP 4
Base overview
A 3-outlet, 2M, 13A UL approved power strip
is pre-installed to the adjustable foundation to
serve as power cord to the power outlet.
One of the outlets is used to power the
adjustable foundation. The remained two
outlets will be handy for the appliances near
the foundations.