User's Manual

CUSTOMER SERVICE: 800-973-8374
9
Frame Assembly Instructions
Carefully lift the adjustable foundation unit out of the
shipping carton, keeping the unit top side down. For
safety reasons, this should be performed by 2 people.
STEP 1
Assembling adjustable foundation legs:
Open the accessories box, take out the 4 legs,
and thread them in a clockwise direction into
the threaded holes in the frame.
STEP 2
NOTE: Tighten the legs securely to the frame.
Leave no space between leg and frame.
STEP 3
Remove and extend the power cord from the
frame.
WARNING:
POWER CORDS MUST NOT INTERFERE
WITH ANY ADJUSTABLE FOUNDATION
MECHANISMS.
A 3-outlet, 2M, 13A UL approved power strip
is pre-installed to the adjustable foundation to
serve as power cord to the power outlet.
One of the outlets is used to power the
adjustable foundation. The remaining two
outlets will be handy for the appliances near
the foundations.
Remove the plastic packaging from the adjustable
foundation.
STEP 4
To avoid damage to the adjustable foundation,
always open the carton while the adjustable
foundation is laying in the FLAT position
on the floor.
IMPORTANT UNPACKING INSTRUCTIONS
OPEN FLAT
Foundation overview