Install Instructions

Page 3 of 4
EASCO Valve, Inc.R 50 Hanover Road, Florham Park, New Jersey 07932 www.ascovalve.com
,0 1R 9  5 
Torq u e Chart
Part Name
Torque Value Inch-- Pounds Torque Value Newton-- Meters
Solenoid base sub---assembly
175 ± 25
19,8 ± 2,8
Bonnet screws
95 ± 10
10,7 ± 1,1
Figure 2. Series 8210 --- AC construction without solenoid.
stem
stem spring
stem
gaskets (2)
bonnet screw (4)
mounting bracket
two positions
(optional)
diaphragm
valve body
body gasket
bleed hole
stem pin
Indicates Parts Supplied
In ASCO Rebuild Kits
solenoid base
sub---assembly
solenoid base
sub---assembly
core spring
core assembly
core spring
core assembly
diaphragm spring
(small end of spring
to seat in cup of
diaphragm spring
(large end of spring
to seat in cup of
diaphragm assembly)
assembly
diaphragm
assembly
bleed hole
(see note1)
(see note1)
Note:
1. Locate bleed hole in diaphragm assembly approximately 45_ from valve outlet.
with Manual Operator
AC Construction
diaphragm assembly)
(see note 2)
(see note 2)
2. Wide end of core spring in core first, closed end protrudes from top of core.
solenoid base
gasket
Standard
AC Construction
bonnet
screw (4)