User manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Descriptions
- 3 Menu Tree
- 4 Basic Operation
- 5 Calling
- 5.1 Open the Call List
- 5.2 Incoming Call
- 5.3 Outgoing Call
- 5.3.1 Pre-Dial
- 5.3.2 Post-Dial with Headset Button
- 5.3.3 Dial Using a Pre-programmed Number
- 5.3.4 Dial a Number from the Call list
- 5.3.5 Dial Last Called Number with Headset Button
- 5.3.6 Dial the Sender of a Message
- 5.3.7 Dial a Number from Contacts
- 5.3.8 Dial a Name from the Central Phonebook
- 5.3.9 Dial a Number from the Company Phonebook
- 5.4 During a Call
- 5.4.1 Adjust the Volume during a Call
- 5.4.2 Open Contacts during the Call
- 5.4.3 Open Messaging Menu during a Call
- 5.4.4 Turn the Microphone On or Off during a Call
- 5.4.5 Lock and Unlock the Keypad during a Call
- 5.4.6 Audio Transfer
- 5.4.7 Start a New Call during Conversation
- 5.4.8 Switch between Calls
- 5.4.9 End a Call
- 5.4.10 Transfer a Call
- 5.4.11 Transfer to New Call
- 5.4.12 Conference Call
- 5.4.13 Call Back
- 5.4.14 Send Call Waiting
- 5.4.15 Answering Call Waiting
- 5.4.16 DTMF
- 5.4.17 DECT Info
- 5.4.18 Send Data
- 5.5 Loudspeaking Function
- 5.6 Call Diversion
- 5.7 Emergency Calls
- 6 Messaging
- 6.1 Mini Messaging
- 6.2 Message List
- 6.3 Receive a Message
- 6.3.1 Read a Stored Message
- 6.3.2 Reply to a Message
- 6.3.3 Delete Messages
- 6.3.4 Forward a Message
- 6.3.5 Call the Sender of the Message
- 6.3.6 Call a Number Included in a Message
- 6.3.7 Save Number
- 6.3.8 Message Templates
- 6.3.9 Write and Send a Message
- 6.3.10 Open a Sent Message
- 6.3.11 Send to Another Destination
- 6.3.12 Review Inbox Content while Reading a Message
- 6.4 Receive a Message with Request for Answer
- 6.5 Message Queuing and Message Priority
- 6.6 Message Priority and Call Priority
- 6.7 Interactive Messaging
- 6.8 Message Indication Repetition
- 6.9 Colored Messaging
- 6.10 Decline a Call with a Predefined Message
- 6.11 Answering a Text Message with a Predefined Message
- 6.12 Calling while Reading a Text Message
- 6.13 Mobile Data
- 6.14 Send Data with Bluetooth Barcode Reader
- 6.15 Voicemail
- 7 Alarm Operation
- 8 Menu Operation
- 9 Procedure Call
- 10 System Profiles
- 11 Advanced Functions
- 12 System Handling
- 13 Troubleshooting
- 14 Operation Notice
- 15 Maintenance
- 16 Related Documents
- 17 Document History
- Appendix A: Bluetooth Headset
- Appendix B: Bluetooth Barcode Reader
- Index
TD 92477EN
31 October 2013 / Ver. J
User Manual
Ascom d62 DECT Handset
41
Redisplay the Message and Terminate the Call
1Press
. The call is terminated and the ongoing call summary details are replaced
by the redisplayed text message.
6.13 Mobile Data
NOTE: This is a system dependent feature for d62 Messenger and d62 Protector only.
6.13.1 Send Mobile Data
User entered data can be sent from the handset by pressing a pre-programmed Hot key or
Soft key, or select
ing a Service. Mobile data can be used for opening a door, starting/
stopping a machine etc. The data can either be predefined, or entered after the Hot key/Soft
key is pressed or Service is selected.
The data can be predefined when program
m
ing the Soft/Hot key or Service, see 8.3.1 Define
Soft Keys on page 56, 8.3.2 Define Hot Keys on pa
ge 56, or 8.4.1 Add Services on page 57.
6.13.2 Send Mobile Data with a Prefix
Mobile data with a prefix is sent from the handset by entering data
and then pressing a pre-
programmed Hot key or Soft key or select a Service. Mobile data with prefix can be used to
send information to an application in the system.
The prefix is predefined by the user when programm
ing the Hot/Soft key or Service, 8.3.1
Define Soft Keys on page 56 on page 46 or 8.3.2
Define Hot Keys on page 56.
6.14 Send Data with Bluetooth Barcode Reader
The handset can be configured to receive data from a Bluetooth barcode reader and then
send the data to another destination. When the handset receives data, it is automatically
transmitted to the destination and is not stored in the handset. A dialog window "Message
sent" is displayed.
For more information about configuration, see the
Configuration Manual for the Ascom d62
DECT Handset. See also Pair and Connect Bluetooth Barcode Reader on pa
ge 46, and user
manual for the Bluetooth barcode reader.
6.15 Voicemail
NOTE: This feature is only available if configured in the system.
6.15.1 Receive a Voicemail
When receiving a voicemail, the content of the voicema
il notification is displayed
automatically on the screen, and is also indicated by the "Voicemail message" icon
in
the status bar.
If the content of the notification is displayed, press "Call" to dial the voicemai
l. If "Close" is
selected, the voicemail can be dialled by a long press on digit key "1" in standby mode, or
from the Inbox menu.
Information is stored in the “Messaging” inbox (see 3.4 Messagi
ng on page 16) until all
voicemail messages have been listened to.