User manual

TD 92477GB
2009-03-18/ Ver. B
User Manual
Ascom d62 DECT Handset
28
6.4 During a Call
Note: Some of these functions are system dependent. The parameters are set up in the
Portable Device Manager (PDM), see Configuration Manual, Ascom d62 DECT Handset,
TD 92639GB, and Installation and Operational Manual, Portable Device Manager (PDM),
Windows version, TD 92325GB.
6.4.1 Adjust the Volume during a Call
Press the "Volume up" button to increase the volume, and the "Volume down" button to
decrease the volume. The handset will now store and keep the new volume level. It is also
possible to use the navigation key, and to adjust the volume.
6.4.2 Open Contacts during the Call
1 Press the soft key "More" during the call.
2 Select "Contacts".
3 Press "Select".
6.4.3 Turn the Microphone on/off during a Call
1 Press the soft key "More" during the call.
2 Select "Microphone off".
3 Press "Select".
The indicate a silenced microphone. This means that the other part in an ongoing call
cannot hear you. To turn the microphone back on, do as follows:
1 Press the soft key "More" during the call
2 Select "Microphone on".
3 Press "Select".
It also possible to turn the microphone off/on by a long press on .
6.4.4 Audio Transfer
To transfer audio between the Bluetooth headset and the handset’s earpiece.
1 Press the soft key "More" during the call.
2 Select "Audio transfer"
1
.
3 Press "Select".
6.4.5 Start a New Call during Conversation
1 Press the soft key "More" during the call.
2 Select "New Call"
2
.
3 Press "Select".
4 Enter the number and press .
1.Visible if Bluetooth connection is active.
2.Visible if defined in the PDM/IMS2.