User manual

TD 92477GB
2009-03-18/ Ver. B
User Manual
Ascom d62 DECT Handset
36
Note: If a handset receives an IM update when the original message already has been
deleted, the handset automatically sends a negative acknowledge (NAK) to the system, if
requested.
A very simple interactive message can look like the one in figure 7 on page 36. The
options depends on the configuration in the client application.
Figure 7. Example of an interactive message
Mobile data from the handset can initiate the application to send the interactive message,
see 7.7 Mobile Data on page 36. The user can then select one action from the list. The
action can be sending a message back to the application and/or dialling a specific number
etc.
7.7 Mobile Data
Note: This is a system dependent feature for d62 Messenger and d62 Protector only.
7.7.1 Send Mobile Data
It is possible to send user entered data from the handset by pressing a pre-programmed
Hot key or Soft key, or selecting a Service. Mobile data can be used for opening a door,
starting/stopping a machine etc. The data can either be predefined, or entered after the
Hot key/Soft key is pressed or Service is selected.
The data can be predefined when programming the Soft/Hot key or Service, see 9.3.1
Define Soft Keys on page 46 6, 9.3.2 Define Hot Keys on page 46, or 9.4.1 Add Services
on page 47.
7.7.2 Send Mobile Data with a Prefix
Mobile data with a prefix is sent from the handset by entering data and then pressing a
pre-programmed Hot key or Soft key or select a Service. Mobile data with prefix can be
used to send information to an application in the system.
The prefix is predefined by the user when programming the Hot/Soft key or Service, 9.3.1
Define Soft Keys on page 46 on page 46 or 9.3.2 Define Hot Keys on page 46.
Conference this evening!
Will you be there?
“Fred Smith” <Fred.Smith
@company.com
2007-04-20 5:44pm
Options Delete Close
Options
Reply
011
Select Back