User`s guide

51
Phone/Call settingsNetworkSound & AlertStatistics/InfoGPS facilitiesAppendix
}See details of a way point
Select Menu > GPS Manager > Way Points
Your way point list is displayed
Scroll to the desired way point
Press
Options
Select Details
Latitude, longitude and altitude of
the way point are displayed
}Send way point as SMS
Select Menu > GPS Manager > Way Points
Your way point list is displayed
Scroll to the desired way point
Press
Options
Select Send as SMS
The SMS editor (see page 23) with
the way point name and the GPS
data is displayed
}Send to PC
Select Menu > GPS Manager > Way Points
Your way point list is displayed
Scroll to the desired way point
Press
Options
Select Send to PC
}Edit way point name
Select Menu > GPS Manager > Way Points
Your way point list is displayed
Scroll to the desired way point
Press
Options
Select Edit
The GPS editor is displayed
Change the name of the way point (see
page 58)
Press
Save
}Delete way point from list
When your way point list contains 10 entries
and you want to add a new way point, you
can delete entries instead of overwriting
them with a new ones:
Select Menu > GPS Manager > Way Points
Your way point list is displayed
Scroll to the desired way point
Press
Options
Select Delete
Press Delete
Switch location track on/off (8-3)
To send the data from the mobile phone to a
PC you have to connect it via a data cable to
the PC whereby the NMEA 0183 V2.20 soft-
ware standard is used.
The mobile phone can only be connected to
a PC serial port, not to an NMEA port.
To switch location track on or off:
Select
Menu > GPS Manager > Location Track
The current setting (’on’ or ’off’) is
displayed
Press
Change
Press Save
Note:
Location Track is suspended during calls.
Show continuous position (8-4)
This function is similar to ’Display your cur-
rent position (8-1)’, the difference being that
the displayed GPS data is constantly updated
at short intervals. This might be useful when
you are in motion, e.g. on the deck of a ship
or in an open car.
By pressing
Options you can use the currently
displayed data for the same features as pro-
vided for
Current Position (see page 50).
Select Menu > GPS Manager > Cont. Position
The current latitude and longitude
data is displayed and updated
every few seconds
Press
$ to display altitude data and
time/date
Press
# to display latitude and longitude
data again