Operation Manual

8 20BA261955/E

Using the extended-feature functions

Conference

After initiating an enquiry call you wish to set up a conference together with your original

call partner.

Press the Foxkey under "Conference"

Note Don’t worry! When you are setting up a conference call, none of your call

partners will be disconnected. The connections will only be disconnected if

the END key is pressed or if the handset is replaced!

Call back

You request a call back from an internal subscriber whose line is busy or who is not

answering.

Press the Foxkey under "Call_back"; you will

hear the confirmation tone. After replacing the

handset, you will see "Call expected from" on

the display and the number/name of the

corresponding subscriber. You can press the

Foxkey under "Reset" to cancel the requested

call back.

Note Only one call back can be activated at a time.

Call waiting

To alert a busy subscriber to your call by using the "Call waiting" tone and an appropriate

display.

Press the Foxkey under "Call_waiting".

Note If the called party rejects your call, the connection will be disconnected.

Paging

To page a person directly or after trying to telephone him.

Press the Menu Key repeatedly until "Page"

appears. Press the Foxkey at this position and

enter the number of the person sought.

Confirm with "Ok".

Conference

Call–back

Reset

Call–waiting

Page

☛