User Manual

Installation instructions, BS330 base station

Technical Product Manual - DCT1800-GAP

TD 92093 (1/LZBNB 103 108 R4D) / 2005-09-23/ Ver.C

 2005

1. Stick the brand label in the front cover recess.

16.3.9 Connecting the base station cables

1. If it is required that the cables enter the base station centrally from above, guide the cables through the

recess in the middle of the base station as shown in figure

41.

Fig. 41 Cables entering the base station centrally from above

2. Plug the modular jack of the data cable into one of the data/power connectors.

3. When an AC-adapter is used:

– Plug the modular jack of the AC-adapter in one of the data/power connectors.

– Plug the AC-adapter into a wall-outlet.

Note:

See also chapter 22, ‘CLU/CLU-S/SLU to base station cabling’

16.3.10 Mounting the base station

1. Hold the base station flat against the mounting bracket and move it downwards until it clicks (see figure 42).

Note:

After completion of the installation, base stations must be initialized using the cordless system manager.

Power

cable

(if used)

Data cable

043