User's Manual

PRELIMINARY
TD 92417GB
2007-02-19/ Ver. PA
User Manual
Ascom a71 Alarm Tranceiver and Ascom p71 Transceiver
12
6 Messaging
6.1 Messages List
The twenty last received messages are stored in a message list.
6.1.1 Read a Stored Text Message
Open the message list by pressing or from the menu. Navigate the list using .
The selected message is highlighted. Press
OK
to read the message. Skip between
messages by using .
If the clock and date function is set, the time when the message was received can be seen.
The time stamp is changed to a date stamp the following day.
6.2 Basic Message Handling
6.2.1 Receive a Text Message
The flashing LED, accompanied by a message tone and/or a vibrating transceiver,indicates
a message. The message tone can be silenced by a press on the "Mute" button. The
message tone will break through silent mode if the message is urgent. The message is
shown in the display.
New messages are marked and unread messages are marked . By pressing any key
(not alarm) the received message is marked as read .
6.2.2 Receive a Message with Request for Answer
A message with request for answer is indicated and viewed the same way as an ordinary
message, see
6.2.1 Receive a Text Message on page 12. Use the Soft keys to do a positive
or negative acknowledgement.
Accept/Reject a Message
Press the soft key “Accept” or “Reject”. An acknowledged message is shown by the text
“Accepted” or “Rejected”.
6.2.3 Delete a Message
Delete a Received Message
Press
C
when the message is displayed. The question “Delete message?“ is shown; press
“Yes”.
Delete a Stored Text Message
Open the message list by pressing , or from the menu. Navigate the list using .
The selected message is highlighted. Press
C
. The question “Delete selected message?”
is shown. Press “Yes”.