User's Manual

PRELIMINARY
TD 92417GB
2007-02-19/ Ver. PA
User Manual
Ascom a71 Alarm Tranceiver and Ascom p71 Transceiver
18
9.1.3 Send Data
The data send function can be used for opening a door, starting/stopping a machine etc.
1Press .
2 Select "Messages".
3 Select “Send data”.
4Use to mark a digit in the virtual digit pad, press
OK
to select the digit.
• To insert a digit in the middle of the text string, press "Edit", use to select
where to insert the digit.
• Press "Insert" and insert the digits.
• To remove a digit, press
C
.
5 Enter data and press “Send”.
9.2 Profiles
It is possible to for the user to define up to eight different profiles in the transceiver. Three
profiles are preset at delivery; Normal, Silent and Loud.
1 Enter the menu by pressing .
2 Select “Profiles” and press
OK
.
3 Navigate the Profiles list using .
Figure 14.
Profiles
Normal
Silent
Loud
Profile 3
013
Figure 13. Profiles list
The profiles are configured in the PDM and can, for example, consist of different ring
signals and volumes. Another example is when several users are sharing the same
transceiver. Each user can then define his own settings, for example; type of ring signal,
volume, soft key settings etc.
9.2.1 Change Profile
To change profile:
1 Select “Profiles” and press
OK
. A list with all profiles is shown.
2 Select the profile with .
3Press
OK
. The name of the marked profile is shown. The transceiver will
automatically return to the profiles list.
A Soft key can be programmed to change profiles, see PDM for more information.
9.3 Services
12 different services can be defined in the transceiver. The services are configured in the
PDM, for more information, see
Appendix A: Programming the Transceiver on page 29.
1 Enter the menu by pressing .