User's Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Description
- 3 Safety Instructions
- 4 Basic Operation
- 5 Alarm Functions
- 6 Messaging
- 7 Navigate the Menu
- 8 Menu Tree
- 9 Menu Operations
- 9.1 Messages
- 9.2 Profiles
- 9.3 Services
- 9.4 Settings
- 9.4.1 Change the Volume
- 9.4.2 Increasing Volume On/Off
- 9.4.3 Vibrator On/Off
- 9.4.4 Message Reminder On/Off
- 9.4.5 Key Beep On/Off
- 9.4.6 Deactivate/Activate Man-down alarm
- 9.4.7 Deactivate/Activate No-movement alarm
- 9.4.8 Deactivate/Activate Pull-cord alarm
- 9.4.9 Set Alarm Data
- 9.4.10 Change the Message Text Size
- 9.4.11 Backlight On/Off
- 9.4.12 Change the Contrast
- 9.4.13 Turn Automatic Key Lock On/Off
- 9.4.14 View Shortcut Keys
- 9.4.15 Select Language
- 9.4.16 Group Numbers
- 9.4.17 Show Time and Date
- 9.4.18 Set Time Format
- 9.4.19 Set Date Format
- 9.4.20 Display System Information
- 9.5 System Test
- 10 Operation Notice
- 11 Maintenance
- 12 Related Documents
- Appendix A: Programming the Transceiver
PRELIMINARY
TD 92417GB
2007-02-19/ Ver. PA
User Manual
Ascom a71 Alarm Tranceiver and Ascom p71 Transceiver
19
2 Select “Services” and press
OK
, a list with all created services is shown.
Figure 15.
Services
Open
Lab door
Get lab results
Require wheelchair
Lock
Close
014
Figure 14. Services list
9.3.1 Activate a Service
1 Select the desired service in the service list using .
2Press
OK
or soft key; to activate the service. If data is sent, the text “Sending” is
shown. The transceiver will automatically return to the list and the selected service
is marked.
9.4 Settings
It is possible for the user to change the settings. The alternatives are; Alert signals, Alarm
settings, Display, Locks, Shortcut keys, General and System.
1 Enter menu by pressing .
2 Select “Settings” and press
OK
, a list with the settings options is shown.
3Use to navigate the Setttings menu.
Figure 16.
Settings
Alert Signals >
Alarm Settings
Display
Locks
015
Figure 15. Settings menu
• Alert Signals; change the settings for all audible signals and the vibrator.
• Alarm Settings; turn the alarms On/Off.
• Display; change the text size and contrast, turn backlight On/Off.
• Locks; select if the keys are automatically locked.
• Shortcut Keys; view which function that is assigned to each shortcut keys.
• General; change the following settings: Language, Group Numbers, Time and Date.
• System; view information about the system and access test functions.
9.4.1 Change the Volume
1 Select “Alert Signals” and press
OK
.
2 Select “Volume Level” and press
OK
. Select the desired volume level by using .
There are six available alternatives; Silent and level 1 to 5.