User's Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Description
- 3 Safety Instructions
- 4 Basic Operation
- 5 Alarm Functions
- 6 Messaging
- 7 Navigate the Menu
- 8 Menu Tree
- 9 Menu Operations
- 9.1 Messages
- 9.2 Profiles
- 9.3 Services
- 9.4 Settings
- 9.4.1 Change the Volume
- 9.4.2 Increasing Volume On/Off
- 9.4.3 Vibrator On/Off
- 9.4.4 Message Reminder On/Off
- 9.4.5 Key Beep On/Off
- 9.4.6 Deactivate/Activate Man-down alarm
- 9.4.7 Deactivate/Activate No-movement alarm
- 9.4.8 Deactivate/Activate Pull-cord alarm
- 9.4.9 Set Alarm Data
- 9.4.10 Change the Message Text Size
- 9.4.11 Backlight On/Off
- 9.4.12 Change the Contrast
- 9.4.13 Turn Automatic Key Lock On/Off
- 9.4.14 View Shortcut Keys
- 9.4.15 Select Language
- 9.4.16 Group Numbers
- 9.4.17 Show Time and Date
- 9.4.18 Set Time Format
- 9.4.19 Set Date Format
- 9.4.20 Display System Information
- 9.5 System Test
- 10 Operation Notice
- 11 Maintenance
- 12 Related Documents
- Appendix A: Programming the Transceiver
PRELIMINARY
TD 92417GB
2007-02-19/ Ver. PA
User Manual
Ascom a71 Alarm Tranceiver and Ascom p71 Transceiver
21
3Use to mark a digit in the virtual number pad, press
OK
to select the
digit.
• To insert a digit in the middle of the text string, press "Edit", use to select
where to insert the digit.
• Press "Insert" and insert the digit.
• To remove a digit, press
C
.
4Press "Save" and "Yes" to save the Alarm Data string.
9.4.10 Change the Message Text Size
1 Select “Display” and press
OK
.
2 Select “Text Size” and press
OK
.
3 Choose between Large Size, Medium Size and Small Size. Press
OK
.
9.4.11 Backlight On/Off
1 Select “Display” and press
OK
.
2 Select “Backlight” and press
OK
; the Backlight checkbox is selected/cleared.
9.4.12 Change the Contrast
1 Select “Display” and press
OK
.
2 Select “Contrast” and press
OK
.
3 Select the desired contrast by using then press “Save” or
OK
.
9.4.13 Turn Automatic Key Lock On/Off
1 Select “Locks” and press
OK
.
2 Select “Auto Key Lock” and press
OK
; the Auto key lock checkbox is selected/
cleared.
In stand-by mode a locked transceiver is shown by in the display.
9.4.14 View Shortcut Keys
The keys can be assigned different functions in the PDM. To check which function that is
assigned to the shortcut keys:
1 Select “Shortcut keys” and press
OK
.
2 Select a key and press
OK
. Information about the assigned function is displayed.
9.4.15 Select Language
1 Select “General” and press
OK
.
2 Select “Language” and press
OK
.
3 Select the desired language using .
4 Press “Select” or
OK
. The language is shown.
9.4.16 Group Numbers
Group numbers makes it possible to send a message to multiple handsets. To add the
handset to a group number and this subscribe to the message in that group.