User's Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Description
- 3 Safety Instructions
- 4 Basic Operation
- 5 Alarm Functions
- 6 Messaging
- 7 Navigate the Menu
- 8 Menu Tree
- 9 Menu Operations
- 9.1 Messages
- 9.2 Profiles
- 9.3 Services
- 9.4 Settings
- 9.4.1 Change the Volume
- 9.4.2 Increasing Volume On/Off
- 9.4.3 Vibrator On/Off
- 9.4.4 Message Reminder On/Off
- 9.4.5 Key Beep On/Off
- 9.4.6 Deactivate/Activate Man-down alarm
- 9.4.7 Deactivate/Activate No-movement alarm
- 9.4.8 Deactivate/Activate Pull-cord alarm
- 9.4.9 Set Alarm Data
- 9.4.10 Change the Message Text Size
- 9.4.11 Backlight On/Off
- 9.4.12 Change the Contrast
- 9.4.13 Turn Automatic Key Lock On/Off
- 9.4.14 View Shortcut Keys
- 9.4.15 Select Language
- 9.4.16 Group Numbers
- 9.4.17 Show Time and Date
- 9.4.18 Set Time Format
- 9.4.19 Set Date Format
- 9.4.20 Display System Information
- 9.5 System Test
- 10 Operation Notice
- 11 Maintenance
- 12 Related Documents
- Appendix A: Programming the Transceiver
PRELIMINARY
TD 92417GB
2007-02-19/ Ver. PA
User Manual
Ascom a71 Alarm Tranceiver and Ascom p71 Transceiver
22
1 Select “General” and press
OK
.
2 Select "Group Numbers" and press
OK
.
3 Select the group number using .
4Press
OK
; the selected group number checkbox is selected/cleared.
9.4.17 Show Time and Date
1 Select “General” and press
OK
.
2 Select “Show Time and Date” and Press
OK
. The Show Time and Date checkbox is
selected/cleared.
9.4.18 Set Time Format
1 Select “General” and press
OK
.
2 Select “Time and Date” and press
OK
.
3 Select "Time" and press
OK
.
4 Scroll to applicible Time format using .
5Press
OK
.
9.4.19 Set Date Format
1 Select “General” and press
OK
.
2 Select “Time and Date” and press
OK
.
3 Select "Date" and press
OK
.
4 Scroll to applicible Date format using .
5Press
OK
.
9.4.20 Display System Information
1 Select “System” and press
OK
.
2 Select “Information” and press
OK
, information about hardware ID and software
versions etc. is displayed.
9.5 System Test
System test menu is activated from the PDM.
1 Select “Settings” and press
OK
.
2 Select “System” and press
OK
.
3 Select “Test” and press
OK
.
9.5.1 Coverage Test
To display the RSSI value:
1 Select “Coverage” and press
OK
.
2 The RSSI should typically have a value above 100 to ensure sufficient coverage.