User's Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Description
- 3 Safety Instructions
- 4 Basic Operation
- 5 Alarm Functions
- 6 Messaging
- 7 Navigate the Menu
- 8 Menu Tree
- 9 Menu Operations
- 9.1 Messages
- 9.2 Profiles
- 9.3 Services
- 9.4 Settings
- 9.4.1 Change the Volume
- 9.4.2 Increasing Volume On/Off
- 9.4.3 Vibrator On/Off
- 9.4.4 Message Reminder On/Off
- 9.4.5 Key Beep On/Off
- 9.4.6 Deactivate/Activate Man-down alarm
- 9.4.7 Deactivate/Activate No-movement alarm
- 9.4.8 Deactivate/Activate Pull-cord alarm
- 9.4.9 Set Alarm Data
- 9.4.10 Change the Message Text Size
- 9.4.11 Backlight On/Off
- 9.4.12 Change the Contrast
- 9.4.13 Turn Automatic Key Lock On/Off
- 9.4.14 View Shortcut Keys
- 9.4.15 Select Language
- 9.4.16 Group Numbers
- 9.4.17 Show Time and Date
- 9.4.18 Set Time Format
- 9.4.19 Set Date Format
- 9.4.20 Display System Information
- 9.5 System Test
- 10 Operation Notice
- 11 Maintenance
- 12 Related Documents
- Appendix A: Programming the Transceiver
PRELIMINARY
TD 92417GB
2007-02-19/ Ver. PA
User Manual
Ascom a71 Alarm Tranceiver and Ascom p71 Transceiver
30
Editing Parameters
When delivered, the transceiver parameters usually is pre-programmed. If any settings
should be changed, the PDM can be used to edit the parameters. For instructions on how
to edit parameters, see Configuration Manual, Ascom a71 Alarm Transceiver and p71
Transceiver, TD 92439GB.
Note: If the transceiver is ordered without customer programming, the Call number has to
be set before editing other parameters.
Upgrading the Firmware
Follow the instructions in Installation and Operation Manual, Portable Device Manager,
TD
92325GB.